Page 1/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 26.05.2014 Revision: 26.05.2014 1 . IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY Product Name: WELLER TIP TINNER / ACTIVATOR Recommended Use of the Chemical and Restriction on Use: For regeneration of oxidized tips Details of Manufacturer or Importer: Element 14 Pty Ltd 72 Ferndell Street Chester Hill NSW 2162 Phone Number: 02 9644 7722 Emergency telephone number: National Poison Information Centre: 13 11 26 2 . HAZARDS IDENTIFICATION Hazardous Nature: Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. STOT SE 3 H335 May cause respiratory irritation. Label Elements Signal Word Warning Hazard Statements H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. Precautionary Statements P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face protection. P264 Wash hands thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P321 Specific treatment (see on this label). P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P332+P313 If skin irritation occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of water. P312 Call a POISON CENTER/doctor if you feel unwell. P362+P364 Take off contaminated clothing and wash it before reuse. P405 Store locked up. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents/container in accordance with local/regional/national regulations. 3 . COMPOSITION AND INFORMATION ON INGREDIENTS Chemical Characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions. (Contd. on page 2) 38.0.35Page 2/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 26.05.2014 Revision: 26.05.2014 Product Name: WELLER TIP TINNER / ACTIVATOR (Contd. of page 1) Hazardous Components: 7440-31-5 tin 34% Eye Irrit. 2A, H319 STOT SE 3, H335 7783-28-0 diammonium hydrogenorthophosphate 12% Acute Tox. 4, H302 Acute Tox. 4, H332 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 STOT SE 3, H335 91-20-3 naphthalene <1% Carc. 2, H351 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 Acute Tox. 4, H302 H227 4 . FIRST AID MEASURES Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop. Skin Contact: In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms occur. Eye Contact: In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention. Ingestion: Rinse mouth with plenty of water. Do not give anything by mouth to an unconscious person. Seek immediate medical attention. 5 . FIRE FIGHTING MEASURES Suitable Extinguishing Media: Dry sand, dry chemiscal. Do not use high power water jet and carbon dioxide. Specific Hazards Arising from the Chemical: Hazardous decomposition products include toxic metal oxide smoke. Use water spray to cool containers involved in fire. Special Protective Equipment and Precautions for Fire Fighters: Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing. 6 . ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment and Emergency Procedures: Wear Safe Work Australia approved respirator, chemical goggles, chemical resistant gloves (PVC), protective clothing (overall), PVC apron and rubber boots. Evacuate all non-essential personnel from affected area. Provide adequate ventilation. Keep away from heat, sparks, open flame, and other sources of ignition Environmental Precautions: In the event of a major spill, prevent spillage from entering drains or water courses. Methods and Materials for Containment and Cleaning Up: Stop leak if safe to do so. Collect the spilled material and place into a suitable container for disposal. Provide adequate ventilation. 7 . HANDLING AND STORAGE Precautions for Safe Handling: Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use. (Contd. on page 3) 38.0.35