SPECIFICATIONS Material: E-SEELS: Silicone Rubber polymer type ASTM D1418 Notes: Temperature Range : E-SEELS: -80F to +400F 1. Mounting screws are supplied in lengths shown unless otherwise specified. Pressure Range : Dust tight and splashproof. 2. New sizes and types of RUBRGLAS-SEELS are being added Resistant to: Salt spray, weather, sunlight, ozone, corona and regularly. Please request other types and styles as required. most acids. Agency Recognition : Front Panel mounted Circuit Breaker Boots are Shelf Life: Excess of 25 years. UL-listed to UL Std. 50, types 1, 2, 3, 12, 12K, and 13. Back-of- Operational Life : 10,000 actuations, minimum. Panel mounted Circuit Breaker boots are UL-listed to UL Std. 50, type 1. Also meet CSA standards. 21/32 3/4 RAISED LETTERS 2 NOTE: ORDER SEPARATELY 2 - 6-32 x 3/8 SEELSKREWS 1 3/16 13/16 .45.005 WALL THICKNESS PANEL (3/32 ) HEINEMANN JA-1 CIRCUIT BREAKER RECOM. CLEAR CE HOLE BACK-OF-PANEL MOUNTED IN PANEL .147 DIA E WALL THICKNESS TOL. CHANGED FROM 0.010 to 0.005 12-18-09 D 08-19-09 SPECIFICATION CHANGED C 1-3-03 CAD COMPUTER GENERATED B ADDED DIMENSIONS NICK 2-6-68 A REDRWAN WITH FULL FLANGE WAS 1 DIA NKS 11-1-67 REV. DESCRIPTION DATE MAXIMUM AND MINIMUM MEASURE- ENG. CIRCUIT BREAKER BOOT, MENTS ARE STATED DIRECTLY ON EACH DIMENSION. 8-9-67 CIRCUIT BREAKER TOGGLE DWN. N.K.S. MAT L: Silicon Rubber Polymer ROUND HOLE MOUNTED CHKD. WS 11-1-67 type ASTM D 1418 SCALE (C1113/40) FINISH: APM-HEXSEAL CORPORATION 2 : 1 HEXSEAL THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.