R2-56X1 APM

ALL DIMENSIONS IN INCHES TOLERANCE +0 -0.02 UP TO 1/2" +0 -0.03 1/2" TO 1" +0 -0.06 1" TO 2" INSTAL. RECOM. CLEAR. Head THREAD SIZE C max D max LENGTH TYPICAL CLEARANCE HOLE DETAIL HOLE (max.) Driver Size TORQUE 2-56 UNC-2A 0.181" 2.5 inch lbs 0.095" 0.062" #1 1/4" to 1" incl. 4-40 UNC-2A 0.238" 0.080" 5.2 inch lbs 0.128" #1 3/16" to 1" incl. 6-32 UNC-2A 9.6 inch lbs 0.294" 0.097" #2 0.149" 1/4" to 1" incl. 8-32 UNC-2A 0.347" 0.115" 19.8 inch lbs 0.177" #2 1/4" to 1" incl. 10-24 UNC-2A 0.403" 0.133" 22.8 inch lbs 0.201" #2 3/8" to 1" incl. 10-32 UNF-2A 0.403" 0.133" 31.7 inch lbs 0.201" #2 3/8" to 1" incl. 1/4-20 UNC-2A 0.517" 0.175" 75.2 inch lbs 0.250" #3 3/8" to 11/4" incl. 1/4-28 UNF-2A 94 inch lbs 0.250" 0.517" 0.175" #3 5/16" to 11/4" incl. STANDARD SPECIFICATIONS & COMMON OPTIONS (HOW TO ORDER) STD. SCREW MATERIAL: TYPE 18/8 STAINLESS STEEL PER DFARS (OTHER MATERIALS AVAILABLE) STD. SCREW FINISH: NATURAL (PASSIVATED QQ-P-35 UNLESS OTHERWISE SPECIFIED) STD. O-RING MATERIAL: SILICONE RUBBER (SEE TABLE FOR O-RING OPTIONS) AVAILABLE O-RING MATERIALS COMMON OPTIONS SAMPLE CATALOG Compound Service R2-56X1/4-2701-BLKOX Material SUFFIX DESCRIPTION NO. Temp. Suffix BLACK OXIDE PER Silicone -150F to 500F PAN HEAD WITH -2701 Rubber -101C to 260C -BLKOX MIL-C-13924A, SCREW TYPE R CROSS RECESS CLASS 2 Fluoro- -78F to 450F LOCKING NYLON -2615 Silicone -61C to 232C -NY ENTER BASIC Rubber PELLET THREAD 2-56 THREAD SIZE -20F to 400F LOCKING NYLON -5701 Viton A -LY -29C to 204C STRIP X Buna N -65F to 250F LOCKING NYLON -4601 -TP (NBR) -54C to 121C STD. PATCH LENGTH 1/4 ENTER LENGTH Neoprene HIGH TEMP. -65F to 300F -3701 (EPR) -54C to 149C -HTP LOCKING NYLON O-RING SUFFIX -2701 ENTER FROM TABLE PATCH Ethylene -65F to 300F Propylene -7601 -54C to 149C OPTIONS -BLKOX ENTER FROM TABLE (EPDM) R CHANGED MIN. LENGTH OF 4-40 UNC-2A FROM 1/4" TO 3/16" S. GOK 07.12.10 P CHANGED CLEAR. HOLE MAX and SCREW FINISH, TOOK OFF MIN. and ADDED INST. TORQUE S. GOK 04.13.10 LENGTH TOLERANCES CHANGED ACCORDING TOM STANDARD S. GOK 03.10.10 O ADDEDPER DFAR FOR THE SCREW MATERIAL S. GOK 07.02.09 N NEW DRAWING FORMAT S. GOK M 01.21.09 CHANGED LENGTH TOLERANCE and ADDED Note L S. GOK 06.10.08 REV. DESCRIPTION DATE MAXIMUM AND MINIMUM MEASURE- ENG. S. GOK 06.10.08 MENTS ARE STATED DIRECTLY ON SEELSKREW PAN HEAD EACH DIMENSION. DWN. S. GOK 06.10.08 CROSS RECESSED CHKD. J. CELLA 06.10.08 MAT'L: AS NOTED SCALE R-0000-00-00 APM-HEXSEAL CORPORATION FINISH: AS NOTED THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.