X-On Electronics has gained recognition as a prominent supplier of HT23-397D Stepper Motors across the USA, India, Europe, Australia, and various other global locations. HT23-397D Stepper Motors are a product manufactured by Applied Motion. We provide cost-effective solutions for Stepper Motors, ensuring timely deliveries around the world.
We are delighted to provide the HT23-397D from our Stepper Motors category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the HT23-397D and other electronic components in the Stepper Motors category and beyond.
Applied Motion Products, Inc. 1-800-525-1609 Product Datasheet 404 Westridge Dr. Tel (831) 761-6555 Watsonville, CA 95076, USA www.Applied-Motion.com HT23-394 NEMA 23 High Torque Step Motor Product Features 2-phase hybrid step motor High torque design Standard NEMA 23 dimensions Series or parallel wiring Description Product Description: The HT23-394 stepper motor is no longer available. The recommended replacement motor is theH T23-594 . The HT23-394 stepper motor is a two-phase hybrid step motor with a NEMA 23 frame size. It is terminated with 8 motor leads, meaning it can be connected in a few different ways including bipolar series and bipolar parallel.Specifications Part Number: HT23-394 Frame Size: NEMA 23 Motor Type: High torque Part Number w/Double HT23-394D Shaft: Part Number HT23-394D-ZAA w/Encoder: Motor Length: 1.61 inches Number of Lead 8 Wires: Lead Wire flying leads, no connector Configuration: Lead Wire/Cable 18 inches inches Length: Lead Wire Gauge: 22 AWG Unipolar Holding 54.2 oz-in Torque: Bipolar Holding 76.7 oz-in Torque: Step Angle: 1.8 deg Bipolar Series 1.41 A/phase Current: Bipolar Series 2.8 Ohms/phase Resistance: Bipolar Series 5.6 mH/phase Inductance: Bipolar Parallel 2.83 A/phase Current: Bipolar Parallel 0.7 Ohms/phase Resistance: Bipolar Parallel 1.4 mH/phase Inductance: Unipolar Current: 2 A/phase Unipolar Resistance: 1.4 Ohms/phase Unipolar Inductance: 1.4 mH/phase 2 Rotor Inertia: 1.70E-03 oz-in-sec Integral Gearhead: No Weight: 1.0 lbs Storage Temperature: -40 to 70 C