101-PRS13023-12

PGA ZIF Test & Burn-in Socket for Any Footprint on Std 8x8 to 21x21 Grid FEATURES Strong Metal Cam Activates Normally-closed Contacts, Preventing Dependency on Plastic for Contact Force Handle mounted on Right- or Left-hand Side Any Footprint Accepted on Standard 13x13 to 21x21 Grid GENERAL SPECIFICATIONS SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS) ORDERING INFORMATION CONTACTS: BeCu 174, 1/2-hard OR Spinodal BeCu CONTACT PLATING OPTIONS: 30 0.762 min. Au per MIL- XXX-PXX XXXXX-1 X G-45204 on contact area, 200 5.08 min. matte Sn per ASTM B545- Plating 97 on solder tail, both over 30 0.762 min. Ni per QQ-N-290 all over 2 = Au Contacts, Sn over Ni Tail HANDLE: Stainless Steel Solder Pin Tail CONTACT CURRENT RATING: 1 amp OPERATING TEMPERATURES: -85F to 257F -65C to 125C Au plating Grid Size & Footprint Number ACCEPTS LEADS: 0.014-0.026 0.36-0.66 dia., 0.120-0.290 3.05-7.37 Series Designator long PRS = Std PLS = Handle on Left MOUNTING CONSIDERATIONS Number of Pins SUGGESTED PCB HOLE SIZE: 0.032 0.002 0.81 0.05 dia. See PCB FOOTPRINT below Plugs into standard PGA sockets Grid Size No. of Pins Dim. C Dim. A Dim. B Dim. D 8 x 8 * 64 0.700 17.78 << SPECIAL ORDER ONLY, Consult Factory 1.695 43.05 1.110 28.19 1.275 32.39 9 x 9 81 0.800 20.32 12 x 12 * 144 1.100 27.94 1.894 48.10 1.510 38.35 1.675 42.55 13 x 13 169 1.200 30.48 14 x 14 * 196 1.300 33.02 2.094 53.20 1.710 43.43 1.875 47.63 15 x 15 225 1.400 35.56 16 x 16 * 256 1.500 38.10 2.294 58.27 1.910 48.51 2.075 52.71 17 x 17 289 1.600 40.64 18 x 18 * 324 1.700 43.18 2.494 63.35 2.110 53.59 2.275 57.79 PLUGS (X) IN THESE COVER HOLE LOCATIONS, OR ANY 19 x 19 361 1.800 45.72 OTHER LOCATIONS REQUIRED WILL ONLY BE SUPPLIED 20 x 20 * 400 1.900 48.26 AS INDICATED ON THE PGA FOOTPRINT OR CUSTOMER- 2.694 68.43 2.310 58.67 2.475 62.87 SUPPLIED PGA WORKSHEET ON PAGE 2. 21 x 21 441 2.000 50.80 * Top- and Right-hand Side Rows left out ALL DIMENSIONS: INCHES MILLIMETERS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE ALL TOLERANCES: 0.005 0.13 UNLESS OTHERWISE SPECIFIED FURNISHED, DEPENDING ON QUANTITY. SPECIAL HANDLE REQUIREMENTS: CONSULT FACTORY ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road Bristol, PA 19007-6810 USA 10004 TEL 215-781-9956 FAX 215-781-9845 Rev. 1.10 WWW.ARIESELEC.COM INFO ARIESELEC.COM 1 of 2PGA ZIF Test & Burn-in Socket for Any Footprint on Std 8x8 to 21x21 Grid PLUGS (X) IN COVER HOLE LOCATIONS WILL ONLY BE SUPPLIED AS INDICATED ON THE PGA FOOTPRINT OR SPECIAL FOOTPRINT INSTRUCTIONS CUSTOMER-SUPPLIED PGA WORKSHEET BELOW. 1. Make a copy of this worksheet TOP VIEW 2. Fill-in circles for footprint desired using the key below 3. Fill-in the information below, including Series and Plating X options. See Ordering Information above W 4. Send worksheet to Aries for prompt quote V U T = no pin KEY S = pin R = plug hole X P N M COMPANY NAME L ADDRESS K J CITY H REQUESTED BY G F PHONE E D DATE C TOTAL NUMBER OF PINS B A SERIES (circle one) PRS PLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ALL DIMENSIONS: INCHES MILLIMETERS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE ALL TOLERANCES: 0.005 0.13 UNLESS OTHERWISE SPECIFIED FURNISHED, DEPENDING ON QUANTITY. SPECIAL HANDLE REQUIREMENTS: CONSULT FACTORY ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road Bristol, PA 19007-6810 USA 10004 TEL 215-781-9956 FAX 215-781-9845 Rev. 1.10 WWW.ARIESELEC.COM INFO ARIESELEC.COM 2 of 2