Embedded Power for Business-Critical Continuity Rev. 02.09.12 108 AD50 Series 1 of 2 AD50 Series 50 Watts Total Power: 50 Watts Input Voltage: 90 - 264 Vac of Outputs: Single Electrical Specifications Input Input ra nge: 90 - 264 Vac (wide range) Special Features Frequency: 47 - 63 Hz Universal AC input Inrush current: 60 A maximum 230 Vac, cold start 25C Fully regulated output Input current: 2 A maximum EN61000-3-2 compliant Efficiency: 80% typical Input power < 74 watts EMI/RFI: FCC Part 15, Class B & EN55022 (CISPR 22) Class B Overcurrent and overvoltage Safety ground 300 A maximum 50/60 Hz, 264 Vac input - AD5012N3L protection leakage current: 100 A maximum 50/60 Hz, 264 Vac input - AD5012N2L High MTBF IEC320 AC input receptacle Output 3 pin (type C6) - AD5012N3L 50 W Maximum Power (Po): 2 pin (type C8) - AD5012N2L 17 ms. minimum at full load 100 Vac, 47 Hz Hold-up time: Built in EMI filter 16 - 20 V Overvoltage protection: (CISPR 22 Class B) Latching type, recycle AC to reset. AC input fuse Overcurrent protection: Output short circuit protection auto recover Complies with One Watt Input Overload protection 110 - 120% above maximum rating Energy Star Requirement DC cable with 2.5 mm x 5.5 mm barrel plug Cable/connector : DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: 5 to +40 C ambient Storage temperature: -40 C to +70 C Electromagnetic Designed to meet EN61000-4-2, -4, -5, level 4 susceptibility: EN61000-4-3, -6, 10v/m EN61000-4-8, -11 EN61000-3-3 Safety and EN61000-3-2 Class A CSA UL 60950-1 Humidity: Operating non-condensing 10% to 90% RH UL CSA CSA-C22.2 no.60950-1 MTBF demonstrated: > 300,000 hours at full load and 25 C ambient conditionsEmbedded Power for Business-Critical Continuity Rev. 02.09.12 108 AD50 Series Americas 2 of 2 Ordering Information 5810 Van Allen Way Model Maximum Output Maximum Ripple 1 2 Peak Load Regulation Carlsbad, CA 92008 3 Number Power Voltage Load P/P (PARD) USA AD5012N3L 50 W 12.5 Vdc 4.16 A 6 A 5% < 500 mV Telephone: +1 760 930 4600 AD5012N2L 50 W 12.5 Vdc 4.16 A 6 A 5% < 500 mV Facsimile: +1 760 930 0698 1. Peak current lasting 200 ms every 3 seconds. 2. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory Europe (UK) settings. Waterfront Business Park 3. Peak-to-peak with 20 MHz bandwidth and 10 F (tantalum capacitor) in parallel with a 0.1 F capacitor at rated Merry Hill, Dudley line voltage and load ranges. West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Mechanical Drawing Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 0.4 (10.5) For global contact, visit: www.Emerson.com/EmbeddedPower 4.72 48 techsupport.embeddedpower (120) (1219 20) 0.4 emerson.com (10.5) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this 4.72 48 information or for any errors or omissions. (120) (1219 20) C6 Emerson Network Power. C8 The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Notes: Monitoring Outside Plant 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is 0.02 ( 0.5 mm) Power Switching & Controls 3. Warranty: 2 year Precision Cooling 4. Weight: 0.61 lb./ 0.28 kg 5. AC input power cord sold separately Racks & Integrated Cabinets 6. Specifications at factory settings at 115 Vac input, 25 C unless otherwise stated Services 7. AC Input Connector: IEC320, C6 or C8, mate with C5 and C7 Surge Protection respectively. EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2011 Emerson Electric Co. 1.61 (41) 1.61 (41) 2.56 (65) 2.56 (65)