Embedded Power for Business-Critical Continuity Rev.05.13.08 bxb150 1 of 4 BXB150 Series Single output Total Power: 150 W Input Voltage: 18 - 36 Vdc 36 - 75 Vdc of Outputs: Single Electrical Specifications Output Voltage adjustability: 60% to 110% Special Features Setpoint accuracy: 1.0% Industry standard footprint Line regulation Low line to high line 0.5% MTBF >1.4 million hours Load regulation Full load to min. load 0.10% (Bellcore 332) Input voltage to ETS300-132-2 Minimum load 0 % Adjustable output voltage Overshoot At turn on and turn-off None No minimum load required Undershoot None Separate case ground pin Ripple and noise 3.3 V and 5 V 75 mV pk-pk, 2:1 input range for battery 20 mV rms 5 Hz - 20 MHz (see note 1) powered applications 12V and 15 V 100 mV pk-pk, 30 mV rms Undervoltage lockout (UVLO) UL, VDE and CSA Temperature coefficient 0.01% / C safety approvals Transient response (see note 2) 2.0% max. deviation Available RoHS compliant 170 srecovery 2 year warranty to within 1.0% Remote sense 0.5 Vdc transmission line drop compensation Safety VDE0805/EN60950/IEC950 UL1950 CSA C22.2 No. 950 Embedded Power for Business-Critical Continuity Rev.05.13.08 Input bxb150 2 of 4 Input voltage range 24 Vin nominal 18 - 36 Vdc 48 Vin nominal 36 - 75 Vdc Input current No load 130 mA max. Remote OFF 20 mA max. Input current (max.) 24 Vin 9.0 A max. lo max. and Vin = 0 to 75 V (See note 4) 48 Vin 6.5 A max. lo max. and Vin = 0 to 75 V Input reflected ripple (See note 6) 5 mA pk-pk Active low remote ON/OFF (See note 7) Logic compatiblity Open collector ref to -input ON 1.2 Vdc max. OFF Open circuit Undervoltage lockout: 24 Vin: power-up 17 V 24 Vin: power-down 16.3 V 48 Vin: power-up 34 V 48 Vin: power-down 32.5 V Startup time (see note 8) Power-up 20 ms Remote ON/OFF 20 ms EMC Charateristics Conducted emissions (see note 3) Bellcore 1089 Level A FCC part 15 Level A EN55022, CISPR22 Level A General Specifications Efficiency See table Isolation voltage Input/case 1500 Vdc Input/output 1500 Vdc Output/case 1500 Vdc Switching frequency Fixed 500 kHz typ. Approvals and VDE0805, EN60950, IEC950 standards (see note 5) UL1950, CSa c22.2 No. 950 Case material Aluminum baseplate with plastic case Weight 110 g (3.88 oz) MTBF Bellcore 332 1,400,000 hours MIL-HDBK-217F 580,000 hours min. 40 C, 100% FL Environmental Specifications Telecom Specifications Thermal performance Operating case temp. -40 C to +100 C Non-operating -55 C to +125 C Central office ETS300-132-2 Altitude Operating 10,000 feet max. interface A Non-operating 40,000 feet max. Vibration 5 - 500 Hz 2.4 G rms (approx.) Protection Short-circuit Continuous, automatic recovery Overvoltage Non-latching Undervoltage Non-latching Thermal 110 C baseplate, automataic recovery