DS1100PED-3 Artesyn Embedded Technologies

Embedded Power for Business-Critical Continuity Rev. 07.16.12 DS1100PED 1 of 8 DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100W continuous Wide Input Voltage 90 to 264Vac Special Features Electrical Specifications 1100W output power High-power and short form factor Input 1U power supply High-density design: 24W/in3 Input ra nge: 90 - 264Vac Active Power Factor Correction Frequency: 47Hz to 63Hz EN61000-3-2 Harmonic Efficiency: 94.0% peak compliance Max Input Current: 14Arms Inrush current control 80plus Platinum Efficiency Inrush Current: 55Apk N+1 or N+N Redundant Conducted EMI: Class A Hot-pluggable Radiated EMI: Class A Active current sharing Full Digital control Power Factor: >0.9 beginning at 20% load PMBus Compliant ITHD: 10% Accurate input power reporting Leakage Current: 1.4mA Compatible with Emersons Universal PMBus GUI Hold-up Time: 10ms at full load Reverse airflow option Two-year Warranty Compliance: Conducted/Radiated EMI FCC Docket 20780 Part 15 Subpart J Class A Limits + 6dB margin EN61000-4-11 Safety UL/cUL 60950 (UL Recognized) NEMKO+ CB Report EN60950 EN60950 CE Mark China CCCEmbedded Power for Business-Critical Continuity Rev. 07.16.12 Electrical Specifications DS1100PED 2 of 8 OUTPUTS Main DC Output MIN NOM MAX Nominal Setting: -0.20% 12 0.20% Total Output Regulation Range 11.4V 12.6V Dynamic Load Regulation Range: 11.4V 12.6V Output Ripple: 120mVp-p Adjustment Range: TBD Output Current: 91.6A 4 2A Current Sharing: Within +/-5% of full load rating Capacitive Loading: 2000uF 40000uF Start-up from AC to Output: 2200ms Output Rise Time: 5ms 50ms Standby DC Output Output Setpoint Range: -1% 12 1% Total Output Regulation Range: 11.4V 12.6V Dynamic Load Regulation Range: 11.4V 12.6V Output Ripple: 120mVp-p Adjustment Range: N/A Output Current: 0.1A 3.0A Current Sharing: N/A Capacitive Loading: 100uF 680uF Start-up from AC to Output: 1700ms Output Rise Time: 2ms 60ms PROTECTIONS Main Output 2 Over-Current Protection : 120% 150% 1 Over-Voltage Protection : 13.5V 15.0V Under-Voltage Protection: 10.5V 11.0V Over-Temperature Protection: Yes Fan Fault Protection: Yes Standby Output 3 Over-Current Protection : 120% 150% 3 Over-Voltage Protection : 13.5V 15.0V Under-Voltage Protection: 10.0V 11.0V 1 Latch mode 2 Autorecovery if the overcurrent is less than 120% and last only for <500ms 3 Standby protection is auto-recovery 4 SMinimum starting current during transient load. Output stays within regulation range at zero load.