DS750PED-3 Artesyn Embedded Technologies

Embedded Power for Business-Critical Continuity Rev. 05.30.13 DS750PED 1 of 8 DS750PED 750 Watts Distributed Power System Front-end Bulk Power Total Output Power: 750W continuous Wide Input Voltage 90 to 264Vac Special Features Electrical Specifications 750W output power High-power and short form factor Input 1U power supply 3 High-density design: 16.4W/in Input ra nge: 90 - 264Vac Active Power Factor Correction Frequency: 47Hz to 63Hz EN61000-3-2 Harmonic compliance Efficiency: 94.0% peak Inrush current control Max Input Current: 9.7Arms 80plus Platinum Efficiency N+1 or N+N Redundant Inrush Current: 38A, cold start Active current sharing Conducted EMI: Class A Full Digital control Radiated EMI: Class A PMBus Compliant Accurate input power reporting Power Factor: >0.9 beginning at 20% load Compatible with Emersons ITHD: 10% Universal PMBus GUI Leakage Current: 1.4mA Reverse airflow option Two-year Warranty Hold-up Time: 10ms at full load Compliance: Class A + 6dB margin Conducted/ Radiated EMI EN61000-4-11 Safety UL/cUL 60950 (UL Recognized) DEMKO+ CB Report EN60950 EN60950 CE Mark China CCC BSMIEmbedded Power for Business-Critical Continuity Rev. 05.30.13 DS750PED 2 of 8 Electrical Specifications Outputs Main DC Output MIN NOM MAX Nominal setting: -0.20% 12 0.20% Total output regulation range: 11.4 V 12.6 V Dynamic load regulation range: 11.4 V 12.6 V Output ripple: 120 mVp-p Adjustment range: TBD 4 Output current: 0.5A 62.5 A Current sharing: Within +/-5% of full load rating Capacitive loading: 2,000 uF 40,000 uf Start-up from AC to output: 2000 ms Output rise time: 5 ms 50 ms Standby DC Output Output setpoint range: -1% 12 1% Total output regulation range: 11.4 V 12.6 V Dynamic load regulation range: 11.4 V 12.6 V Output ripple: 120 mVp-p Adjustment range: N/A Output current: 0.1 A 3.0 A Current sharing: N/A Capacitive loading: 47 uF 680 uF Start-up from AC to output: 1700 ms Output rise time: 2 ms 60 ms Protections Main Output MIN NOM MAX 2 Over-current protection : 120% 150% 1 Over-voltage protection : 13.5 V 15.0 V Under-voltage protection: 10.5 V 11.0 V Over-temperature protection: Yes Fan fault protection: Yes Standby Output 3 Over-current protection : 120% 150% 3 Over-voltage protection : 13.5 V 15.0 V Under-voltage protection: 10.0 V 11.0 V 1 Latch mode 2 Autorecovery if the overcurrent is less than 120% and last only for <500 ms 3 Standby protection is auto-recovery 4 Minimum starting current during transient load. Output stays within regulation range at zero load.