Embedded Power for Business-Critical Continuity Rev.07.30.08 PTH05050 1 of 5 PTH05050 5 Vin Single Output Total Power: 21.6W Input Voltage: 4.5 - 5.5VDC of Outputs: Single Electrical Specifications Output Voltage adjustability (See note 4) 0.8 - 3.6 Vdc Special Features Setpoint accuracy 2.0% Vo 6 A output current Line regulation 10% mV typ. 5 V input voltage Wide-output voltage adjust Load regulation 12 mV typ. (0.8 Vdc to 3.6 Vdc) total regulation 3% Vo Auto-track sequencing* Pre-bias start-up capability Minimum load 0 A Efficiencies up to 95% Ripple and noise 20 MHz bandwidth 20 mV pk-pk Output ON/OFF inhibit Output voltage sense Temperature co-efficient -40C to +85 C 5% Vo Point-of-Load-Alliance (POLA) Transient response (see note 5) 70 s recovery time compatible Overshoot/undershoot 100 MV Available RoHS compliant 2 Year Warranty Input Input voltage range See note 3 4.5 - 5.5 Vdc Input current No load 10 mA typ. Remote ON/OFF See note 1 Positive logic Startup time 1 V/ms Undervoltage lockout 3.7 - 4.3 Vdc typ. Track input voltage Pin 2 (See note 6, 7) 0.3% Vin Safety EMC Charateristics UL/cUL CAN/CSA-C22.2 Electrostatic discharge EN61000-4-2, IEC801-2 No. 60950-1-03/UL 60950-1, Conducted immunity EN61000-4-6 File No. E186249 Radiated immunity EN61000-4-3 TV Product Service (EN60950) Certificate No. B 06 07 38572 068Embedded Power for Business-Critical Continuity Rev.07.30.08 General Specifications PTH05050 2 of 5 Efficiency See Efficiency Table 95% max. Insulation voltage Non-isolated Switching frequency 550 kHz to 650 Khz Approvals and EN60950 standards UL/cUL60950 Material flammability UL94V-0 Dimensions (L x W x H) 22.10 x 12.57 x 8.50 mm 0.870 x 0.495 x 0.335 in. Weight 2.9 g (0.10 oz) MTBF demonstrated Telcordia SR-332F 7,092,000 hours Environmental Specifications Thermal performance Operating ambient, -40 C to +85 C (see note 2) temperature Non-operating -40 C to +125 C MSL ( Z suffix only) JEDEC J-STD-020C Level 3 Protection Short-circuit Auto reset 12 A typ. *Auto-track is a trade mark of Texas Instruments All specifications are typical at nominal input, full load at 25 C unless otherwise stated Cin = 100 F, Cout = 0 F Ordering Information 2 Output Output Regulation Input Output Output Current Efficiency Power Current Model Number Voltage Voltage (Max.) (Typ.) Line Load (Max.) (Min.) 21.6 W 4.5 - 5.5 Vdc 0.8 - 3.6 V 0 A 6 A 95% 10 mV 12 mV PTH05050