SIL30C-12SADJ-V

SIL30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 1 NEW Product 30 A current rating Input voltage range: 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 5.0 Vdc Industry leading value Cost optimized design Excellent transient response Output Voltage adjustability Pathway for future upgrades Supports silicon voltage migration Resulting in reduced design-in and qualification time Designed in reliability: MTBF of > 3.9 million hours per Telcordia SR-332 Current Share Available RoHS compliant The SIL30C Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5 Vdc output voltage range with a 30 A load. The series offers remote ON/OFF, overtemperature protection and overcurrent protection as standard. Its current share facility supports parallel operation of multiple SIL30C units and the remote sense feature enables the SIL30C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30C reduces 2 YEAR WARRANTY compliance costs and time to market. All specifications are typical at nominal input, full load at 25 C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS (CONTD.) Voltage adjustability (See Note 1) 0.9-5.0 Vdc Turn ON threshold 9.0 Vdc Turn OFF threshold 7.6 Vdc Output setpoint accuracy Using 1.0% trim resistors 3% GENERAL SPECIFICATIONS Line regulation Low line to high line 0.2% max. Efficiency 91% Load regulation Full load to min. load 1.5% max. Switching frequency Fixed 300 kHz typ. Min/max load 0 A/30 A Approvals and (See Note 7) TV Product Services Overshoot At turn-on 1.0% max. standards IEC60950, UL/cUL60950 Undershoot At turn-off 100 mV max. Material flammability UL94V-0 Ripple and noise (See Note 2) 50 mV pk-pk Weight 28.3 g (1 oz) 5 Hz to 20 MHz 15 mV rms MTBF Telcordia SR-332 4,456,655 hours Transient response Deviation 75 mV (See Note 3) 150 s recovery to within regulation band ENVIRONMENTAL SPECIFICATIONS Current share Full load 10% Thermal performance Operating ambient, 0 C to +80 C (See Note 8) temperature INPUT SPECIFICATIONS Non-operating -40 C to +125 C Input voltage range Nominal 12 V 10.2-13.8 Vdc PROTECTION Input current No load 230 mA Short-circuit Foldback, non-latching Remote OFF 30 mA Overtemperature Hiccup, non-latching Input current (max.) (See Note 4) 13.8 A max. Io max. and Vin = 10.8 V RECOMMENDED SYSTEM CAPACITANCE Input reflected ripple (See Note 2) 150 mA (pk-pk) Input capacitance (See Note 9) 270 F/20 m esr max. Output capacitance (See Note 9) 2 x 680 F/10 m esr max. Remote ON/OFF Logic compatibility Logic high ON >2.4 Vdc OFF <0.8 Vdc International Safety Standard Approvals Start-up time Power up <30 ms UL/cUL CAN/CSA 22.2 No. E139421 (See Note 5) Remote ON/OFF <30 ms UL60950 file No. E139421 TV Product Service (EN60950) Certificate No. B04 08 19870 228 CB report and certificate to US/6415C/UL File Name: SIL30C.PDF Rev (04): 16 Dec 2005SIL30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER OVP CURRENT CURRENT (11) (10,12,13,14) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 150 W 10.2-13.8 Vdc N/A 0.9-5 V 0 A 30 A 91% 0.2% 1.5% SIL30C-12SADJ-VJ Part Number System with Options SIL30C-12SADJ-VJ (13) Product Family Packaging Options SIL = Single in Line J = Pb-free (RoHS 6/6 compliant) Rated Output Current Mounting Option 30 = 30 Amps V = Vertical Mount H = Horizontal Mount Performance C = Cost Optimised Number of Outputs SADJ = Single Adjustable Output Input Voltage 12 = 10.2 Vdc to 13.8 Vdc OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee SSIILL3300CC--1122SSAADDJJ SSeerriieess The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9 V NNootteess PIN CONNECTIONS 1 Uses external resistor from TRIM to output ground. See Application Note PIN NO. FUNCTION PIN NO. FUNCTION 132 for details. 2 Measured with external filter. See Application Note 132 for details. 1 TRIM 13 Vin 3 di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. 2 No Pin 14 Vin 4 External input fusing is recommended. 5 Power up is the time from application of dc input to POWER GOOD high. 3 Ground 15 Vout Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3 m. 4 Power Good 16 Vout 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 Not Connected 17 Ground 8 See Application Note 132 for operation above 50 C. 9 See Application Note 132 for ripple current requirements. 6 Current Share 18 Vout 10 The standard unit with the suffix -V is for vertical mounting. To order a unit with horizontal mounting, please add the suffix -H to the model 7 Ground 19 Ground number, e.g. SIL30C-12SADJ-HJ. 11 This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An 8 Ground 20 Vout external resistor adjusts the output voltage. 12 To order a unit with a pin length of 0.150, please add suffix P4 to the 9 Remote ON/OFF 21 Ground model number, e.g. SIL30C-12SADJ-HP4J. 13 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10 Remote sense (GND) 22 Vout 14 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool 11 Remote sense (O/P) 23 Ground at