SIL30C-12SADJ-VJ

POWER SIL30C Series Data Sheet C-Class Non-Isolated Total Power: 30 Amps Input Voltage: 10.2 - 13.8 Vdc of Outputs: Single SPECIAL FEATURES 30 A current rating Input voltage range: 10.2 - 13.8 Vdc Nominal output voltage: 0.9 - 5 V Industry-leading value Electrical Specifications Cost optimized design Excellent transient response Input Output voltage adjustability Input voltage range Nominal 12 V 10.2 - 13.8 +Vdc Pathway for future upgrades Input current No load 230 mA Remote OFF 30 mA Supports silicon voltage migration Input current (max.) See Note 4 13.8 A max. Io max. and Vin = 10.8 V Reduced design-in and qual time Input reflexted ripple See Note 2 150 mA (pk-pk) Designed in reliability: MTBF of Remote ON/OFF >3.9 million hours per Telcordia Logic compatibility Logic high SR-332 ON >2.4 Vdc OFF <0.8 Vdc Current share RoHS compliant Start-up time See Note 5 Power up: 30 ms Remote ON/OFF: 30ms Two year warranty Turn ON threshold 9.0 Vdc Turn OFF threshold 7.6 Vdc SAFETY Output UL, cUL CAN/CSA 22.2 No. E139421 Voltage adjustability See Note 1 0.9 to 5.0 Vdc UL60950 File No. E139421 Output setpoint accuracy Using 1.0% trim resistors 3.0% TV Product Service (EN60950) Line regulation Low line to high line 0.2% Certificate No. B04 08 19870 228 Load regulation Full load to min. load 1.5% CB report and certificate to Min./max. load 0 A/30 A US/6415C/UL Overshoot At turn-on 1.0% max. Undershoot At turn-off 10 mV max. Ripple and noise See Note 2 50 mV pk-pk 5 Hz to 20 MHz 15 mV rms Transient response See Note 3 75 mV typical deviation 150 s recovery to within regulation band Current share Full load 10% All specifications are typical at nominal input, full load at 25 C, unless otherwise stated.SIL30C Series Data Sheet General Specifications Environmental Specifications Efficiency 91% Thermal performance Operating ambient temperature -0 C to +80 C (See Note 8) Non-operating temperature -40 C to +125 C Switching frequency Fixed 300 kHz typ. Protection Approvals and (See Note 7) TV Product Services standards EN60950, UL/cUL60950 Short-circuit Foldback, non-latching Material flammability UL94V-0 Over-temperature Hiccup, non-latching Weight 28.3 g (1 oz) Recommended System Capacitance MTBF Telcordia SR-332 4,456,655 hours Input capacitance (See Note 9) 270 F / 20 mW ESR max. Output capacitance (See Note 9) 680 F / 10 mW ESR max. Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency (10, 12) Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load SIL30C-12SADJ-VJ 150 W 10.2 - 13.8 Vdc 0.9 - 5 V 0 A 30 A 91% 0.2% 1.5% Part Number System with Options Product Family Performance Input Voltage Number of Outputs Output Voltage Mounting Option Packaging Options Rated Output Current SIL 30 C - 12 S ADJ - V J SIL = Single In Line C = Cost 12 = 10.2 - 13.8 S = Single Output ADJ = Adjustable V = Vertical J = Pb free (RoHS 30 = 30 Amp Optimized Vdc Ouput H = Horizontal 6/6 compliant) Notes: Output Voltage Adjustment 1. Uses external resistor from TRIM to output ground. See Application Note 132 for details. The ultra-wide output voltage trim range offers major advantages to users 2. Measured with external filter. See Application Note 132 for details. who select the SIL30C-12SADJ. It is no longer necessary to purchase a 3. di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo variety of modules in order to cover different output voltages. The output max to 0.5 lo max. voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the 4. External input fusing is recommended. SIL30C-12SADJ converter leaves the factory the output has been adjusted to 5. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF the default voltage of 0.9 V. asserted high to POWER GOOD high. 6. Signal line assumed <3 m. 7. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8. See Application Note 132 for operation above 50 C. 9. See Application Note 132 for ripple current requirements. 10. The standard unit with the suffix -V is for vertical mounting. To order a unit with horizontal mounting, please add the suffix -H to the model number, e.g. SIL30C-12SADJ-HJ. 11. This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage. 12. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at