High-Speed, Isolated BB-485OPDR-HS RS-422/485 Repeater Features Extends RS-422/RS-485 an extra 1.2 km (4000 ft) 2 kV isolation and IEC ESD protections Data rate: up to 1.5 Mbps -40 to +80C wide operating temperature DIN rail mount (panel mount with optional brackets) Power supply required, not included, sold separately Introduction Ordering Information Model BB-485OPDR-HS is a high speed, optically isolated RS-422/485 repeater that Model No. Description supports data rates up to 1.5 Mbps, making it suitable for use in fieldbus systems such as Profibus. BB-485OPDR-HS High-Speed Isolated RS-422/485 Repeater Isolation - Model BB-485OPDR-HS provides 2 kV digital isolation with 8 kV air ESD protection and 600 W transient voltage suppression on the data lines. Accessories Sold Separately Range Extension - Model BB-485OPDR-HS can be used to extend the range of a BB-MDR-20-24 Power supply, 24 Vdc, 1.0 A, DIN rail mount network up to 1.2 km (4000 ft), depending on data rates, and to add additional nodes. BB-MDR-40-24 Power supply, 24 Vdc, 1.7 A, DIN rail mount 2-wire RS-485, 4-wire RS-485 and RS-422 are supported. Data signals and the power inputs connect to built-in terminal blocks. Enclosure - The enclosure has a DIN rail mount enclosure that is designed to easily fit on standard 35mm DIN rail. Power - The repeater operates on externally sourced 10 to 30 Vdc power (power supply is required, not included, sold separately). BB-USOPTL4-2P BB-USOPTL4-4P 0221ds All product specifications are subject to change without notice. BB-485OPDR-HS 2921dsBB-485OPDR-HS Specifications Mechanical Serial Technology RS-422/485 Connector Terminal block Enclosure Material Plastic TDA(-), TDB(+), RDA(-), RDB(+), GND IP Rating 20 RS-422 Dimensions 2.5 x 7.9 x 9.5 cm (1.0 x 3.1 x 3.8 in) Signals RS-485 2-wire and 4-wire Mounting 35 mm DIN rail (optional panel mount adapter available) Protected GND on isolated side Environmental Data Rate Up to 1.5 Mbps (bit-wise enabled) Operating Temperature -40 to +80 C (-40 to +176 F) Industrial Bus Modbus ASCII / RTU Storage Temperature -40 to +85 C (-40 to +185 F) Isolation Operating Humidity 0 to 95%, non-condensing Method Optical Meantime Between Failures (MTBF) Rating 2000 V MTBF 117376 hours Surge Suppression Calculation Method MIL 217F Parts Count Reliability Prediction Method TVS 12 V bi-directional avalanche breakdown device Regulatory Approvals / Standards / Directives Rating 600 W peak power dissipation Approvals FCC Class B, CISPR Class B (EN55032) CE Response Time <1 pico-second 2014/30/EU - Electromagnetic Compatibility Directive LED Indicators 2011/65/EU amended by (EU) 2015/863 Reduction of Hazardous CE Standards Substances Directive (RoHS) Data LED for each side of isolator 2 Data LEDs (Green) 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE) Flashes when data is transmitted EN 5 5032 Class A Electromagnetic Compatibility of Multimedia Power Equipment Emission Requirements Connector Terminal block EN 55024 Information Technology Equipment Immunity CE Directives Characteristics Limits and Methods of Measurement Voltage 10 to 30 Vdc EN 61000-6-1 - Generic Immunity Standard for Residential, Power Consumption 1.9 W, 160 mA 12 Vdc Commercial and Light-industrial Environments Source External (power supply required, sold separately) EN61000-6-2 (Heavy Industrial) Terminal Blocks IEC60068-2-27 (Shock) 15G Peak, 11 ms, 3 axes Other IEC60068-2-6 (Vibration) 140-500 Hz, 1G, 3 axes Wire Size 24 to 14 AWG IEC60068-2-32 (Drop) 10 total drops from sides, corner, edges Torque 4-kgf-cm 8 7 6 5 4 3 2 1 Mechanical Diagram 79 3.11 D D 53 2.09 25 .98 C C 95.2 3.75 73.8 2.91 B B 10.6 .42 UNLESS OTHERWISE SPECIFIED: NAME DATE DRAWN TW 7/3/18 DIMENSIONS ARE IN INCHES TOLERANCES: CHECKED TITLE: FRACTIONAL ANGULAR: MACH 1 BEND 1 A A ENG APPR. TWO PLACE DECIMAL .010 THREE PLACE DECIMAL .005 CUSTOMER INTERPRET GEOMETRIC DRAWING PROPRIETARY AND CONFIDENTIAL TOLERANCING PER: COMMENTS: THE INFORMATION CONTAINED IN THIS MATERIAL SIZE DWG. NO. REV DRAWING IS THE SOLE PROPERTY OF B+B SMARTWORX. ANY FINISH REPRODUCTION IN PART OR AS A WHOLE 485OPDR-HS B NEXT ASSY USED ON WITHOUT THE WRITTEN PERMISSION OF B+B SMARTWORX IS PROHIBITED. APPLICATION DO NOT SCALE DRAWING SCALE: 1:1 WEIGHT: SHEET 1 OF 1 8 7 6 5 4 3 2 1