Standard Serial to Fiber Optic Converters Models BB-FOSTCDR, BB-FOSTCDR-INV www.advantech.com FEATURES Converts serial data signals to multi-mode fiber 2000V, 2-way isolation EMI/RFI protection Data rate: up to 115.2 kbps Wide operating temperature: -40 to +80 C DIN rail mount Modbus ASCII/RTU compatible 10-30 VDC power source required (not included, sold separately) Model BB-FOSTCDR-INV: inverted fiber state fiber Off in idle state The BB-FOSTCDRx line of fiber optic converters are suitable for standard ORDERING INFORMATION industrial installations. These converters extend data communications up to 4 km SERIAL FIBER INVERTED MODEL NUMBER ISOLATION CONNECTOR CONNECTOR FIBER STATE * (2.5 mi) and provide two-way optical isolation on the input and output lines. BB-FOSTCDR Terminal Block Multi-mode ST 2,000 V - Model BB-FOSTCDR industrial serial to multimode fiber optic converter , BB-FOSTCDR-INV Terminal Block Multi-mode ST 2,000 V provides the most versatile connection possible between any asynchronous full * Inverted fiber state fiber is Off in the idle state. or half-duplex serial equipment. In addition to direct point-to-point connectivity, it is capable operating in a multi-drop mode. This allows one serial device to communicate with up to 31 other devices around a fiber optic ring. Since ACCESSORIES - sold separately the BB-FOSTCDR supports mixed serial standards, you can replace other BB-MDR-10-24 - Power Supply, AC-DC, 10W, 24VDC, 0.42A, DIN Rail Mount converters and isolators and add the EMI/RFI immunity inherent to fiber optic BB-SMI6-12-V-ST - Power Supply, 6W, 12VDC, 500mA, DIN Rail Mount communications. An Automatic Send Data Control circuit controls the RS-422/485 driver chip, eliminating the requirement for special software. Easy to install and configure, it has an 8-position DIP switch to set up the RS-422/485 parameters and terminal blocks to connect serial signals and power. In RS-232 mode, it supports Transmit and Receive data. Handshaking signals are not passed through. What is the difference between Model BB-FOSTCDR A 10-30 VDC external power source is required (power supply is not included, and Model BB-FOSTCDR-INV sold separately). The BB-FOSTCDR keeps the light in the fiber turned On when no data is transmitted and the input signal is in the MARK state (idle). If light is lost or too low, Model BB-FOSTCDR-INV features an inverted fiber state and is suitable for the electrical signals go to the SPACE state. The input signal turns the light Off/On applications requiring the fiber optic light to be Off in the idle state. in step with the data. This model has an indicator for Transmit and Receive, if no light is received, the RD LED will come on, the RD output will be positive relative to GND (normally negative), and in RS-422 or RS-485 mode, no light will set the TD(A)- line high relative to TD(B)+. The usual voltage with light in the fiber and no signal sets the B line high relative to A (about 4.4 Volts DC no termination). The BB-FOSTCDR-INV is the opposite. The fiber is Off in the idle state. All product specifications are subject to change without notice. BB-FOSTCDR, BB-FOSTCDR-INV 3020ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.comStandard Serial to Fiber Optic Converters Models BB-FOSTCDR, BB-FOSTCDR-INV SPECIFICATIONS SERIAL TECHNOLOGY INDUSTRIAL BUS RS-232: 115.2 Kbps maximum Modbus ASCII / RTU Data Rate RS-422/485: 460.8 Kbps maximum MECHANICAL RS-232 LED Indicators Serial TD, RD, Power Connector Terminal block (24 to 14 AWG) Dimensions 10.6 x 7.9 x 2.5 cm (4.3 x 2.3 x 0.95 in) RS-232 TD, RD, GND Enclosure 35mm DIN mount, plastic RS-422/485 Weight 182 gm (0.4 lb) Connector Terminal block (24 to 14 AWG) ENVIRONMENTAL RS-485, 2-wire Data A(-), Data B(+), GND Operating Temperature -40 to +80 C (-40 to +176 F) RS-422/485, 4-wire TDA(-), TDB(+), RDA(-), RDB(+), GND Storage Temperature -40 to +85 C (-40 to +185 F) ISOLATION Operating Humidity 0 to 95%, non-condensing Rating 2KV RMS, 1 minute MEANTIME BETWEEN FAILURE (MTBF) Lines Protected 2-way (input, output lines) MTBF 2187303 hours Method Optical Calculation Method MIL 217F Parts Count Reliability Prediction FIBER OPTIC TECHNOLOGY BB-FOSTCDR (only) Type / Wavelength Multi-mode / 820 nm cULus Recognized, File Number: E222870, UL508 Output Power (-) 17 to (-) 10 dBm APPROVALS / DIRECTIVES / STANDARDS: BB-FOSTCDR & BB-FOSTCDR-INV Receive Sensitivity (-) 25.4 dBm to (-) 24 dBm FCC Part 15, CISPR, KCC Cable 62.5/125 micro-meter 2014/30/EU Electromagnetic Compatibility Directive Connector ST 2011/65/EU amended by (EU) 2015/863 Reduction of CE - Directives Hazardous Substances Directive (RoHS) Data Rate 9.6 to 115.2 kbps 2012/19/EU Waste Electrical and Electronic Equipment (WEEE) Maximum Distance 4 km (2.5 mi) EN 55032 Class B Electromagnetic compatibility of multimedia Idle State Transmitter light ON equipment Emission requirements POWER EN 55024 Information technology equipment Immunity CE - Standards requirements Source External, required (power supply not included, sold separately) EN 61000-6-1 Generic immunity standards for residential, Input Voltage 10 to 30 VDC commercial and light-industrial environments Consumption 1.7 Watts Connector Terminal block (24 to 14 AWG) 8 7 65 4 3 2 1 MECHANICAL DIAGRAM - Model BB-FOSTCDR D D 65 8 7 4 3 2 1 2.094 D D C C 2.094 3.754 A 4.173 C C 2.919 B B 3.754 A 4.173 2.919 .992 3.118 .472 B B 3.535 TITLE: A A INDUSTRIAL SERIAL NOTES: CONVERTERS A - ST CONNECTORS SHOWN TO ILLUSTRATE MAXIMUM DIMENSIONS. (FOSTCDR SHOWN) PROPRIETARY AND CONFIDENTIAL DEPENDING ON YOUR MODEL, A CONNECTOR MAY NOT BE THE INFORMATION CONTAINED IN THIS Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA (800)346-31SIZ19E /DWToll Free G. NO. orders advantech-bb.com support advantech-bb.com REV LOCATED IN THIS POSITION. DRAWING IS THE SOLE PROPERTY OF B&B electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT - B THE WRITTEN PERMISSION OF B&B electronics IS PROHIBITED992 3.118 .472 SCALE: 1:1 SHEET 1 OF 1 8 7 6 5 4 2 1 3.535 TITLE: A INDUSTRIAL SERIAL A NOTES: CONVERTERS A - ST CONNECTORS SHOWN TO ILLUSTRATE MAXIMUM DIMENSIONS. (FOSTCDR SHOWN) PROPRIETARY AND CONFIDENTIAL DEPENDING ON YOUR MODEL, A CONNECTOR MAY NOT BE THE INFORMATION CONTAINED IN THIS SIZE DWG. NO. REV DRAWING IS THE SOLE PROPERTY OF LOCATED IN THIS POSITION. B&B electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT - B THE WRITTEN PERMISSION OF B&B electronics IS PROHIBITED. SCALE: 1:1 SHEET 1 OF 1 8 7 6 5 4 2 1