Data Sheet 50 MHz Programmable Pulse Generators Models 4033 & 4034 Description Features & Benefits Dual-Channel Model 4034 The 4033 and 4034 are high performance pro- Repetition rate of 0.1 Hz to 50 MHz Both channels offer full functionality and all grammable pulse generators for testing digital Flexible trigger modes: Continuous, Triggered parameters such as pulse width and transition systems and circuits based on TTL, CMOS, or (internal, external, manual), Gated Burst and time can be set independently ECL technologies. Both instruments generate External Width Synchronize both channels with the push of a clean and accurate pulses at up to 6 digits reso- Pulse width programmable from 10 ns to 10 s button lution with a repetition rate up to 50 MHz, vari- Transition times (rise and fall times) variable Saves cost and bench space able pulse widths from 10 ns to 10 s, and pulse delays from 0 ns to 10 s. Output levels are from 6 ns to 100 ms adjustable from -10 V to +10 V, with pulse Programmable delay and double pulse amplitudes settable from 0.1 Vpp to 10 Vpp into Applications Predefined amplitude levels for ECL, TTL, and a 50 ohm load. All parameters, modes, and CMOS signals Automatic Test Equipment (ATE) functions are programmable via the front panel Store up to 99 different test setups with auto Avionics and radar testing or remote control commands. Additionally, the retention of last power down setup pulse generators provide selectable complemen- Switching power supply testing tary pulse and double pulse generation in contin- 10 Vpp into 50 ohm output Characterization of active components uous, triggered, gated, and counted burst Closed case calibration modes. Programmable via GPIB and RS-232 SCPI compatible Three year warranty Technical data subject to change wwwwww..bbkk pprreecciissiioonn..ccoomm B&K Precision Corp. 201950 MHz Programmable Pulse Generators Models 4033 & 4034 Industry Leading Performance External Width Variable Transitions Straightforward User Interface In the external width pulse mode, pulse period For added flexibility, variable rise and fall times These generators use a menu-driven front panel and width are determined by an externally can be programmed from 6 ns to 100 ms. keypad and control knob to adjust all parameters. applied signal. The pulse generator then applies Various shapes of pulses can be obtained for The bright, easy-to-read display shows all rele- transition and level parameters to this signal in applications where parameters such as linearity, vant parameters along with a graphical represen- order to generate the pulse. A power supply switching times, or reflection times must be ana- tation of the output pulse. If an entered parame- designer for example could use this feature to lyzed. Programmable rise and fall times could be ter is not compatible with the existing setup sta- shape the width and period of the output signal used to measure operational amplifier slew rates tus, the operator is informed by an error mes- to drive the power supplys FET transistors while and easily test thresholds of devices and circuits. sage. remaining synchronized with its control circuits. Users can conveniently select predefined ampli- tude levels for TTL, ECL, and CMOS signals, or choose a custom amplitude level for specialized applications. Front Panel Interface Menu Keys Selects menu Output On Button Turns the options for waveform parameters main output signal on or off F1-F5 Key Select menu options Manual Trigger Key Sends that appear on the bottom section manual trigger pulse when of the LCD display pushed (requires instrument to be in manual trigger mode) 4033 Output Section Main output and Sync output 22 wwwwww..bbkk pprreecciissiioonn..ccoomm