Data Sheet True RMS Bench Multimeter 5492B True RMS Bench Multimeter Features & benefits The B&K Precision model 5492B is a versatile The 5492B measures volts and amps with great 5-digit, 120,000-count display resolution 5-digit, 120,000-count bench multimeter accuracy and stability, with basic VDC accuracy 0.01% basic VDC accuracy suitable for applications in education, service of 0.01%. The meter is also capable of measur- Advanced triggering options such as external, repair, and manufacturing. The instrument ing frequency, period, resistance, continuity, and bus and event trigger enhances your productivity with built-in math performing diode tests. Readings can be taken at Two and four-wire resistance measurement up functions and USB connectivity. Rel, Max/Min, a maximum rate of 57 readings/sec and stored to 120 M dBm, dB, %, and Hold functions provide to an internal 512-byte buffer for post educators with a convenient tool to teach basic acquisition statistical analysis. AC voltage and AC current measurement over math concepts. Additionally, the 5492B offers wide frequency range (ACV 100 kHz/ACI 10 powerful features not commonly found in other The 5492B was designed for cost-conscious kHz) 5- digit DMMs such as advanced triggering, users requiring an accurate meter with a broad AC (RMS) and DC current measurements up buffer storage operation, and a GPIB interface range of features offered at a value price. to 12 A option. Limit mode for Pass/Fail testing Save/recall up to 10 instrument settings Increase Productivity with PC Connectivity Built-in math functions: Rel, Max/Min, dBm, The 5492B is programmable via USB, RS232, dB, %, Hold, Limit Test and GPIB (5492BGPIB only) interface using CATI (1000 V)/CATII (300 V) protection industry standard SCPI commands. Users can USB (Virtual Com) and RS232 interface remotely control and configure the instrument SCPI compatible from a PC and retrieve measurement results for further analysis. The multimeter can also be remotely controlled using application software (via USB & RS232), which supports front panel emulation and data logging of measurement results. Technical data subject to change www.bkprecision.com B&K Precision Corp. 2017True RMS Bench Multimeter Model 5492B Easy operation Versatile tools Limit Operation Front panel The limit operation lets you set and control the Bright VFD display Input banana terminals values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit. Advanced Triggering A variety of advanced trigger options are available: Manual Trigger via a front panel button press, Bus Trigger sending a *TRG command via PC interface, External Trigger using the EXT TRIG input terminal on the rear panel. Additionally, a trigger delay can be programmed after an event detection, and a VM Comp output is available to indicate the instruments Power button Interface keypad mA Fuse socket completion of a present measurement. Fast Buffering with Built-in Statistics VM Comp Rear panel External (Voltmeter RS-232 Trigger BNC complete) BNC The 5492B provides an internal buffer capable Serial number label (Serial) interface output terminal input terminal of storing up to 512 readings. Buffer storage operation can be enabled via front panel or remote command. The buffer fills up with the requested number of readings at a rate of up to 57 readings/sec and then stops. The instrument USB interface automatically calculates statistical information based on the stored readings such as minimum, maximum, or average reading, and standard deviation, which can then be retrieved along with the readings via the front panel or remote command. Power line GPIB (IEEE-488) interface Chassis ground (model 5492BGPIB) screw terminal fuse holder 2 www.bkprecision.com