Data Sheet Programmable AC Power Sources 9800 Series Features 0 to 300 V, low distortion AC power source with models delivering a maximum of 1500 VA, 12 Arms / 48 Apeak * 9803 and 9805 models only Output frequency adjustable from 45 Hz 500 Hz The 9800 Series is both a programmable List mode can be used to generate sequences of Select 150 V / 300 V autoranging or 300 V AC source and measurement tool. These fully waveforms such as surges, sags, and frequency programmable linear AC sources deliver a disturbances. The programmed list can be range operation for continuous sweep from maximum of 1500 VA through the universal line triggered from the front panel or via BNC 0 - 300 V output terminals on the front and the output connector on the rear. Displays Vrms, Irms, Ipeak, frequency, PF, connector on the rear. The output can be varied apparent power, true power, and elapsed from 0 to 300 V with 0.1 V programming Standard USB, RS232, LAN and GPIB* output time resolution. The output frequency can also be interfaces can be used to remotely control the Adjustable phase angle control adjusted from 45 Hz to 500 Hz with start and source via a PC. Free application software and stop phase angle from 0 to 360 degrees. The LabVIEW driver are available to reduce Programmable voltage and frequency limit bright VFD display shows Vrms, Irms, Ipeak, programming time and increase productivity. settings frequency, power factor (PF), apparent power, Built-in PLD and dimmer simulation true power, and elapsed output time. Voltage and frequency sweep mode List mode: 10 user-defined programs with up These AC sources provide a power line Common applications to 100 programmable steps each disturbance (PLD) simulator, list mode, and The 9800 Series AC power sources are suitable sweep mode for simulation of common power BNC I/O for external triggering, output status for evaluating transformers, TRIACs, SCRs and grid faults and disturbances. A built-in dimmer indication/control, and synchronization passive components as well as production, R&D, function is also available for testing motors and Save and recall up to 100 instrument settings LEDs. service, and pre-compliance testing. Standard USB (USBTMC-compliant), RS232, LAN and GPIB* interfaces OVP/OCP/OPP/OTP protection modes and key lock function Model 9801 9803 9805 Pre-compliance testing for voltage dips and Voltage (rms) 0 - 300 V frequency simulations according to Max. Power 300 VA 750 VA 1500 VA IEC61000-4-11 / 4-14 / 4-28 LabVIEW driver and softpanel for remote control available Technical data subject to change www.bkprecision.com B&K Precision Corp. 2015Programmable AC Power Sources 9800 Series Front panel Model 9801 Bright VFD display shows Vrms, Irms, Ipeak, frequency, power factor (PF), apparent power, true power and elapsed output time. Numeric keypad for direct entry of Function Cursor AC output AC output waveform parameters keys keys terminal Models 9803 & 9805 Rear panel LAN RS232 USB Cooling AC line interface interface interface fan input BNC I/O for triggering, output status / control, and synchronization AC output terminal Model 9801 AC line 110/220 V BNC I/O AC output System BUS RS232 LAN USB GPIB input selector trigger terminal (not used) interface interface interface interface Cooling fans Models 9803 & 9805 2 www.bkprecision.com Encoder knob for quick analog style control