PR-60 User Manual Safety Summary To avoid personal injury and/or product damage, review and comply with the following safety precautions. These precautions apply to both operating and maintenance personnel and must be followed during all phases of operation, service, and repair of this probe. Only qualified personnel should use this probe. This differential voltage probe is designed to be used by personnel who are trained, experienced, or otherwise qualified to recognize hazardous situations and who are trained in the safety precautions necessary to avoid possible injury when using such a device. Do not work alone when working with high voltages. For your own safety, inspect the probe and accessories for cracks and frayed or broken leads before each use. If defects are noted, DO NOT USE the probe. Hands, shoes, floor and work bench must be dry. Avoid making measurements under humidity, dampness or other environmental conditions that might affect safety. The probe should be kept clean and free of any conductive contamination. Do not remove the probe casing. Removal of the probes casing may expose you to electric shock. Do not use the probe with its case open. Disconnect the inputs and outputs of the probe before opening the case. Use only in office-type indoor setting The probe is designed to be used in office-type indoor environments. Do not operate the probe: z In the presence of noxious, corrosive, or flammable fumes, gases, vapors, chemicals, or finely-divided particulates. z In environments where there is a danger of any liquid being 714-921-9095 bkprecision.com 1