Q10RP6R Banner

Q10 Series Miniature self-contained dc photoelectric sensors Features Self-contained dc sensors in miniature right-angle housings only 11 mm (0.43 in) thick Epoxy-encapsulated circuitry IP54 (NEMA5) construction hermetically-sealed optics 1.8 m (70 in) opposed range or 0.5 m (20 in) diffuse range diffuse models have sensitivity adjustment Choose models for light operate or dark operate choose either NPN (sinking) or PNP (sourcing) output models Note: A model with a QD connector requires an optional mating cable. Q10 Opposed Mode Emitter (E) and Receiver (R) Supply NPN/ L.O./ Models Range Cable Voltage PNP D.O. Excess Gain Beam Pattern Q106E 2 m (6.5 ft) Effective Beam: 5 mm Q106EQ 3-pin Pico QD 1000 Q10 Series E Q10AN6R 2 m (6.5 ft) Q10 Series 300 mm 12 in L.O. X Opposed Mode Q10AN6RQ 3-pin Pico QD C Opposed Mode 200 mm 8 in 100 E NPN 100 mm 4 in S Q10RN6R 1.8 m 2 m (6.5 ft) 0 0 S 10-30V dc D.O. 100 mm 4 in Q10RN6RQ (70 in) 3-pin Pico QD 10 G 200 mm 8 in A 300 mm 12 in I Q10AP6R 2 m (6.5 ft) N L.O. 1 0 .5 m 1.0 m 1.5 m 2.0 m 2.5 m Q10AP6RQ 3-pin Pico QD 20 in 40 in 60 in 80 in 100 in .01 m .1 m 1 m 10 m PNP .033 ft .33 ft 3.3 ft 33 ft DISTANCE Q10RP6R 2 m (6.5 ft) DISTANCE D.O. Q10RP6RQ 3-pin Pico QD Q10 Diffuse Mode Excess Gain Beam Pattern Supply NPN/ L.O./ Models Range Cable Voltage PNP D.O. Performance based on 90% reflectance white test card Q10AN6D 2 m (6.5 ft) 1000 L.O. Q10 Series Q10AN6DQ 3-pin Pico QD Q10 Series E Diffuse mode 60 mm 2.4 in X Diffuse Mode NPN 40 mm 1.6 in C 100 Q10RN6D 2 m (6.5 ft) E 20 mm 0.8 in D.O. S 0 0 Q10RN6DQ 3-pin Pico QD S 0.5 m 20 mm 0.8 in 10-30V dc 10 (20 in) G 40 mm 1.6 in Q10AP6D 2 m (6.5 ft) A L.O. 60 mm 2.4 in I Q10AP6DQ 3-pin Pico QD N 0 125 mm 250 mm 375 mm 500 mm 625 mm PNP 1 5 in 10 in 15 in 20 in 25 in Q10RP6D 2 m (6.5 ft) 1 mm 10 mm 100 mm 1000 mm DISTANCE .04 in .4 in 4 in 40 in D.O. Q10RP6DQ 3-pin Pico QD DISTANCE Printed in P/N 45725 rev. BQ10 Series Product Specifications Sensing Beam Infrared, 880 nm Supply Voltage and Current 10 to 30V dc (10% maximum ripple) Emitter or receiver: 15 mA Diffuse models: 20 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity Output Configuration SPST solid-state dc switch Choose NPN (current sinking) or PNP (current sourcing) models Choose light operate (N.O.) or dark operate (N.C.) models Output Rating 150 mA maximum Off-state leakage current: <10 microamps at 30V dc On-state saturation voltage: <0.5V at 10 mA dc <1.5V at 150 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Overload trip point 220mA, typical, at 20C Output Response Time Opposed mode: 8 mso, 4 msof Diffuse mode: 3 mso andof Repeatability Opposed mode: 1.0 ms Diffuse mode: 0.75 ms Adjustments Diffuse models (only) single-turn, top-mounted SENSITIVITY control for adjustment of system gain (turn clockwise to increase) Indicators Opposed mode receivers and diffuse mode sensors have two LEDs: Green and Yellow GREEN glowing steadily = power to sensor iso GREEN flashing = output is overloaded YELLOW glowing steadily = light is sensed YELLOW flashing = marginal excess gain (1-1.5x) in light condition Emitters have one Green LED to indicate when power to sensor iso Construction Housings are black ABS Rated UL 94V0 Lenses are hermetically-sealed glass lens covers are clear acrylic Circuitry is epoxy-encapsulated and completely sealed Stainless steel M2.5 mounting hardware is included Environmental Rating IP54 (NEMA 5) Connections 2 m (6-1/2 ft) attached cable, or 3-pin pico-style quick-disconnect fitting Cables for QD models are purchased separately Operating Temperature -40 to +70C (-40 to 158F) Maximum relative humidity 90% at 50C (non-condensing) Quick Disconnect (QD) Cables The following is the selection of cables available for the Q10 QD models Style Model Length For use with DImensions Pinout 10 mm max. (0.4 in) 3-pin PKG3-2 2 m (6.5 ft) Pico Style Black Wire straight 28 mm max. Brown Wire Blue Wire (1.1 in) All Q10 sensors with 25 mm max. quick-disconnect fitting (1.0 in) 3-pin PKW3-2 2 m (6.5 ft) 20 mm Pico Style (0.8 in) right-angle 12 mm max. (0.5 in) page 2 Banner Engineering Corporation