THEINDUSTRIALNETWORKCOMPANY The N-TRON 100-POE4 Industrial PoE Mid-Span Injector is designed to trasmit power along with data over an Ethernet network. It is ideal for powering PoE capable devices where running an AC power feed is either not possible or cost effective. PoE allows an end user to power a PoE camera, wireless access point, or any other PoE capable device without the need for running separate wires for power. This also allows the ability for a centralized battery backup for all these devices. PRODUCT FEATURES Compact, Space Saving Package IEEE 802.3af Compliance American Bureau of Shipping (ABS) Type Approval EN50155 for Railway applications Four 10/100BaseTX RJ-45 Ports (Data In) Four 10/100BaseTX RJ-45 PoE Ports (Data & Power Out) Unmanaged Operation Extended Environmental Speci cations -40C to 85 Operating Temperature The 105FX-POE automatically detects any PoE device Automatic Detection of Connected PoE Devices that is connected and powers it accordingly. If a PoE fault is Up to 0.8 Gb/s Maximum Throughput detected on a specific port the Auto-disconnect feature Full Wire Speed Communications disables PoE power on that port, allowing only data Supports 15.4 Watts per port communications to pass. This reduces the risk of damaging (13 Watts at the PD) costly equipment. Redundant Power Inputs (46-49 VDC) The 100-POE4 is an ideal candidate for providing data and Power Fault Status LED power to wireless LAN access points, network cameras, VoIP, LED PoE Status Indication and other PoE capable devices. The product also helps Hardened Metal DIN-Rail Enclosure reduce costs by eliminating the need for electrical wiring and electrician expenses. PRODUCT OVERVIEW Ideal for upgrading non-PoE network infrastructures with The 100-POE4 has extended operating environmental PoE capabilities, the 100-POE4 Industrial PoE Mid-Span specifications to meet the harsh needs of the industrial Injector is designed to solve the most demanding industrial environment. For cost savings and convenience the device communications requirements by providing high throughput can be DIN-Rail mounted alongside Ethernet I/O or other and minimum downtime while also providing power to PoE Industrial Equipment. capable devices over the existing Ethernet network. To increase reliability the 100-POE4 provides dual redundant The 100-POE4 provides four pairs of two RJ-45 power inputs. Dual LED s indicate that power is being applied 10/100BaseTX copper ports. Each pair consists of one with a valid power source on the respective redundant power RJ-45 port that connects to an existing network, and one input. This allows for easy monitoring of the two redundant RJ-45 PoE capable port that can send data and, up to 15.4 watts power inputs. A global power LED is also present at the top of power to a PoE capable device. The data on all four pairs of the unit to indicate an overall valid power source or when are isolated from each other allowing for ease in upgrading a power bus fault occurs. non-PoE network infrastructures. THEINDUSTRIALNETWORKCOMPANY 100-POE4 SPECIFICATIONS BENEFITS Case Dimensions PoE Industrial Network PSE Compact Size / Small Footprint Height: 3.5 (8.9cm) Ability to Power Devices via LAN Width: 1.5 (3.8 cm) Eliminates need for Costly Electrical Wiring Depth: 3.6 (9.0 cm) Extended Environmental Speci cations Weight: 0.7 lbs. (0.32 kg) Hardened Metal DIN-Rail Enclosure DIN-Rail: 35mm High Performance High MTBF >2M Hours Electrical ESD Protection Diodes on RJ-45 Ports Input Voltage: 46-49 VDC Surge Protection Diodes on Power Inputs Steady Input Current Under Full Load: 1.6 A 48V Ease of Use Steady Input Current Under No Load: 30mA 48V Plug & Play Operation Unmanaged Operation Inrush: 27Amp/1.5ms 48V Ideal for Network Expansion Environmental Auto-Detection of Connected PoE Devices o o Operating Temperature: -40 C to 85 C Dual PoE Status LED s per port o o Storage Temperature: -40 C to 85 C Operating Humidity: 10% to 95% Increased Performance (Non Condensing) Full Wire Speed Communications Operating Altitude: 0 to 10,000 ft. Auto-Disconnect of PoE Port if Fault is Detected Reliablity Regulatory Approvals MTBF: >2 Million Hours FCC Title 47 Part 15 Class A UL Listed (US and Canada) per ANSI/ISA-12.12.01-2000, Network Media Class I, Div 2, Groups A,B,C,D,T4A 10BaseT: >Cat3 Cable ICES-003- Class A 100BaseTX: >Cat5 Cable CE: EN61000-6-2,4 EN61000-4-2,3,4,5,6 Connectors 10/100BaseTX: Eight (8) RJ-45 EN55011 Copper Ports ABS Type Approval for Shipboard Applications DNV Type Approval Certi cation Recommended Wiring Clearance EN50155 for Railway Applications Front: 2 (5.08 cm) GOST-R Certi ed RoHS Compliant Top: 1 (2.54 cm) Designed to comply with: IEEE 1613 for Electric Utility Substations NEMA TS1/TS2 for Traf c Control Equipment Ordering Information Contact Information 100-POE4 Four Pair 10/100BaseTX Ports N-TRON Corp. N-TRON Europe GmbH Four POE Ports 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 Mobile, AL 36609 USA 6330 Cham / Zg Switzerland TEL: (251) 342-2164 TEL: +41 41 7406636 NTPS-48-5 DIN-Rail Power Supply FAX: (251) 342-6353 FAX: +41 41 7406637 48V 5 Amp Website: www.n-tron.com Email: N-TRON info n-tron.com REV 090805 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.