BB-WCD1H2102H Wzzard Mesh Wireless Sensor BB-WCD1H3001HP100 Monitoring Nodes Commercial Applications Features Ultra-low power 802.15.4e SmartMesh IP technology Communicates with SmartSwarm 342 gateway via a highly scalable and reliable wireless mesh network Internal temperature & humidity sensing support Connect to industry standard analog or digital sensors MQTT and JSON IoT protocol to application platform Wide operating temperature range Monitor refrigeration, food processing/storage or light stacks Introduction Ordering Information Wireless Connectivity Where You Need It Model No. Description The Wzzard mesh intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and your application, on your network Wzzard Mesh Wireless 802.15.4e Sensor Node or on the Internet. The platform uses Wzzard mesh wireless sensor nodes and a HVAC/Cooler Node for Temperature & Humidity Sensing BB-WCD1H2102H wireless 802.15.4e SmartMesh IP network to transmit sensor data to the gateway. The 2 AI, 1 DI, 1 Thermistor, Internal SmartSwarm 342 gateway connects to the Internet via wired connections or cellular data Temperature & Humidity, Internal Antenna networks. Wzzard Mesh Wireless 802.15.4e Sensor Node Commercial Stacklight Node for Light Sensing BB-WCD1H3001HP100 Reliable, Highly Scalable Wireless Network 3 AI, vBat Out, Internal Antenna The Wzzard Mesh platform uses mesh networking and time-synchronized channel Internal Temperature & Humidity supported hopping to provide up to 99.999% connectivity, even in demanding RF environments. New nodes may be added at any time the SmartMesh IP network will dynamically self- configure as nodes are added or removed. This is a function of the mesh network itself Accessories Sold Separately and does not need to be controlled by the network gateway. One gateway can support up Or included with select Wzzard starter kits (see kit/s below for details) to 100 nodes. BB-WCHMS Door sensor cable (open/close) Easy Installation and Configuration BB-WCHCBL Thermistor/Breakout sensor cable Non-intrusive - even portable - network overlay is easy to install and remove with no BB-LSSCBL Light sensor cable (stack light) disruptions to your existing network and no downtime. Configuration of the Wzzard mesh BB-JC10F50V 50A clamp-on current sensor (compressor, fan) sensor platform is easy via the Advantech hub cloud management portal. Starter Kits Available Dimensions Everything you need to get started easy to expand later. Refrigeration/Cooler Monitoring Model BB-WSK-REF-2 1 - Wzzard wireless node - temperature & humidity ( BB-WCD1H2102H) 2 - Clamp-on current sensors ( BB-JC10F50V) 1 - 10K thermistor for temperature ( BB-WCHCBL) 1 - Door open/close sensor ( BB-WCHMS) 1 - SmartSwarm 342 Gateway Stack Light Monitoring Model BB-WSK-SLM-2 1 - Wzzard wireless node - light ( BB-WCD1H3001HP100) 1 - Stack Light Sensor Cable ( BB-LSSCBL) 1 - SmartSwarm 342 Gateway BB-USOPTL4-2P BB-USOPTL4-4P 0221ds All product specifications are subject to change without notice. BB-WCD1Hxx WzzardCommercialNodes 1321ds Some names and phrases are trademarks and property of their respective owners.BB-WCD1H2102H BB-WCD1H3001HP100 Specifications Technology Regulatory Approvals / Standards / Directives Wireless 802.15.4e, SmartMesh IP FCC Part 15, 15.247, Class B Industry Canada - RSS210 LED Network Connectivity, Node Status 2014/35/EU Low Voltage Directive Power 2014/53/EU Radio Equipment Directive Internal 3.6V 1650 mAH Lithium Thionyl Chloride 2/3 AA battery CE - Directives 2011/65/EU amended by (EU) 2015/863 - Reduction of Hazardous Battery Life 5-year battery life, based on 1 minute sensor sampling interval Substances Directive (RoHS) 2012/19/EU Waste Electrical and Electronic Equipment (WEEE) Mechanical EMC: Physical Connection Molex 6-pin MicroClasp ETSI EN 300 328 v2.1.1 - EMC & Radio Spectrum Matters (ERM) Antenna Internal Wideband Transmission Systems, 2.4 GHz ISM Band Mounting bracket (included), VHB adhesive strip (included), ETSI EN 301 489-1 V2.1.1 - Applied in accordance with the specific Mounting Options or zip tie (ties not included) requirements of: ETSI EN 301 489-17 V3.2.0 - EMC and Radio Spectrum Matters: Dimensions 120.38l x 27.42h x 19.05d mm (4.74l x 1.08h x 0.75d in) Broadband Data Sytems Weight 0.09 kg (0.2 lb) EN 55032 +AC, Class A Information technology equipment RF Emissions Wireless Security EN 55024 Information Technology Equipment Immunity CE - Standards Characteristics Limits and methods of measurement Device Authentication Safety: 128-bit AES-based encryption with multiple keys EN/IEC 61010-1 3rd Ed. Safety requirements for electrical requipment for measurement, control, and laboratory use. General requirements Message Integrity Check (MIC) EN/IEC 61010-2-201 1st Ed. Particular requirements for control Synchronized Key Changeovers equipment Customized Key Rotation RF Exposure: EN 62479 - Assessment of the compliance of low power electronic and Thionyl Chloride Lithium Battery* (1 supplied with product) electrical equipment with the basic restrictions related to human exposure Temperature Range -60 to +85 C to electromagnetic fields (10 MHz to 300 GHz) Nominal Capacity 1.65 Ah EN 61000-6-2 - Generic Immunity Standard for (Heavy) Industrial Environments Nominal Voltage 3.6 V EN 61000-6-4 + A1 - Emission Standard for (Heavy) Industrial Standards - Diameter 14.5 mm Environments other EN 60255-21-1 - Vibration, 2g, 10-500 Hz,1.5mm displacement Height 33.5 mm EN 60255-21-2 - Shock, 50g, 11ms half sine wave, 18 shocks *Potential Hazard: Do not recharge, crush, disassemble or heat above +100C (+212F) IEC 60068-2-31 - Drop Environmental Installation Indoor Operating Temperature -20 to +70 C (-4 to +158 F) Storage Temperature -40 to +85 C (-40 to +187 F) Operating Humidity 0 to 95%, non-condensing SmartMesh IP 802.15.4e Radio Specifications Parameter Conditions Minimum Typical Maximum Units Frequency Band 2.400 2.4835 GHz Number of Channels 15 Channel Separation 5 MHz Channel Clear Frequency Where k = 11 to 25, as defined by IEEE 802.4.15 2405 + 5*(k-11) MHz Modulation IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) Raw Data Rate 250 kbps Indoor 100 m Range Outdoor 200 m Receiver Sensitivity Packet Data Error Rate (PER) = 1% -93 dBm Receiver Sensitivity PER = 50% -95 dBm Conducted Output Power (PA on) Delivered to a 50 load 8 dBm Conducted Output Power (PA off) Delivered to a 50 load 0 dBm Radiated Output Power (PA on) Taoglas PA.11.BB antenna 7 dBm Radiated Output Power (PA off) Taoglas PA.11.BB antenna -1 dBm