X-On Electronics has gained recognition as a prominent supplier of 3079ANH.00500 across the USA, India, Europe, Australia, and various other global locations. 3079ANH.00500 are a product manufactured by Belden. We provide cost-effective solutions for 3079ANH.00500, ensuring timely deliveries around the world.
We are delighted to provide the 3079ANH.00500 from our Belden manufacturer, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the 3079ANH.00500 and other electronic components in the Belden manufacturer and beyond.
Product: 3079ANH Version: 8 Date: 23-4-2013 Page: 1 / 2 3079ANH 1 Instrumentation and computer cable AWG22 solid bare copper 2 Foam skin PE insulation 3 Z foil +copper braiding 4 FRNC sheath 5 6 Applications For data Transmission applications such as Profibus General Standards EN 50290-2-27 Construction & Dimensions 1. Inner Conductor Material solid bare copper Diameter AWG22 2. Insulation Material Foam skin Polyethylene Diameter over insulation 2.51 0.09 mm Nominal thickness of skin 0.05 mm Colour of insulation Red and green 3. Filler (2x) Material FR-polypropylene Diameter 2.54 mm Colour Blue 4. Foil (Z-fold) Material Aluminium / Polyester Thickness 25 / 50 m 5. Braiding Material AWG36 tinned copper Coverage 65% 6. Sheath Material FRNC Colour Gray (like RAL 7037) or Purple Nominal sheath thickness 1.10 mm Nominal diameter over sheath 8.00 mm Product: 3079ANH Version: 8 Date: 23-4-2013 Page: 2 / 2 Mechanical characteristics Parameter Specification Unit Flame resistance IEC 60332-3-24 Smoke density IEC 61034 Oil resistance IEC 60811-404 Application specification EN 50290-2-27 Halogen content according to IEC 60754-1 zero Corrosivity of fire gasses according to IEC 60754-2 Conductivity 100 S/cm 4.3 pH value Temperature range installing -15 to +80 C Temperature range operating (moving installation) -15 to +80 C Temperature range operating (fixed installation) -45 to +80 C Temperature range storage -45 to +80 C Maximum pulling tension 220 N Minimum bending radius 10 x cable diameter Electrical characteristics Parameter Specification Unit Nominal resistance conductor 52 /km Nominal capacitance conductor to conductor 1kHz 27.9 pF/m Capacitance unbalance 1kHz < 1000 pF/km Impedance (3 20 MHz) 150 15 Nominal velocity of propagation 78 % Maximum attenuation 0.2 MHz 0.9 dB/100m 4 MHz 2.2 dB/100m 16 MHz 4.5 dB/100m Test voltage conductor-conductor 2500 VDC, 3 seconds Test voltage conductor-screen 2500 VDC, 3 seconds Voltage rating 300 V RMS *Nominal values are for information only. Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2011/65/EU, 02 Jan. 2013) this is valid for all material produced after the RoHS compliant date for this product.