MRG214.00100 Belden

code TECHNICAL DATA SHEET MRG214 version 3 date 2015-05-01 COAX RG 214 PVC page 1/2 APPLICATION Coaxial cables used for Radio-frequency designed according the International Standard IEC 1196. CONSTRUCTION 1 2 3 4 5 1 Inner conductor 7x0.75 mm stranded silver plated copper 2 Dielectric Solid PE 3 Braid layer 1 Silver plated copper 4 Braid layer 2 Silver plated copper 5 Sheath PVC according the European Standard HD 624. REQUIREMENTS AND TEST METHODS Test methods in accordance with International Standard IEC 1196. Mechanical characteristics 1. Inner conductor Construction: 7x0.75 mm Diameter: 2.25 mm 0.03 mm 2. Dielectric Diameter: 7.25 mm 0.2 mm 3. Braid layer 1 Diameter screen: 8.0 mm 0.25 mm Coverage braid: 86% 4 % 4. Braid layer 2 Diameter screen: 8.7 mm 0.25 mm Coverage braid: 90% 4 % 5. Sheath: Diameter: 10.8 mm 0.2 mm 2 Tensile strength: 12.5 N/mm Elongation at break: 150 % Cable: Crush resistance of cable: < 1% (load of 700N) Storage/operating temperature: -40C to +70C Minimum installation temperature: -5 C Minimum static bend radius: 110 mm Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner code TECHNICAL DATA SHEET MRG214 version 3 date 2015-05-01 COAX RG 214 PVC page 2/2 Electrical characteristics Mean characteristic impedance: 50 2 DC loop resistance: 9.1 /km DC resistance inner conductor: 6.0 /km DC resistance outer conductor: 3.1 /km Capacitance: 100 pF/m 3 pF/m Velocity ratio: 0.66 0.02 4 Insulation resistance: > 10 M.km Voltage test of dielectric: 3 kVdc Return loss at 100-1000 MHz: 23 dB Power rating at 100 MHz: 760 W 1000 MHz: 175 W Attenuation at Nominal 50 MHz: 4.3 dB/100m 230 MHz: 9.9 dB/100m 470 MHz: 14.9 dB/100m 860 MHz: 21.3 dB/100m 1000 MHz: 23.3 dB/100m Maximum attenuation is 10% higher. REVISIONS Description Date Initials 2 Removed SE demand above 1000MHz 2010-02-22 PBo 3 Coverage braid layer 1 corrected to 86% 2015-05-01 RvN Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003) this is valid for all material produced after the RoHS compliant date for this product. Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner