The PFE600-12-054xA is a 600 Watt, AC to DC power-factor-corrected (PFC) power supply that converts standard AC mains power into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and reliability servers, routers, and network switches. The PFE600-12-054xA meets international safety standards and displays the CE-Mark for the European Low Voltage Directive (LVD). Best-in-class, 80 PLUS certified Platinum efficiency Wide input voltage range: 90-264 VAC AC input with power factor correction Always-On 16.5 W programmable standby output (3.3/5 V) Hot-plug capable Parallel operation with active digital current sharing Full digital controls for improved performance 3 High density design: 14.0 W/in Small form factor: 321.5 x 54.5 x 40 mm (12.66 x 2.14 x 1.57 in) I2C communication interface for control, programming and monitoring with PSMI and Power Management Bus protocol Overtemperature, output overvoltage and overcurrent protection 256 Bytes of EEPROM for user information High Performance Servers Routers Switches 2 PFE600-12-054xA PFE 600 - 12 - 054 x A Product Family Power Level Dash V1 Output Dash Width Airflow Input N: Normal PFE Front-Ends 600 W 12 V 54 mm A: AC R: Reversed The PFE600-12-054xA AC-DC power supply is a mainly DSP controlled, highly efficient front-end. It incorporates resonance-soft- switching technology and interleaved power trains to reduce component stresses, providing increased system reliability and very high efficiency. With a wide input operating voltage range and no derating of output power with input voltage and temperature, the PFE600-12-054xA maximizes power availability in demanding server, switch, and router applications. The front-end is fan cooled and ideally suited for server integration with a matching airflow path. The PFC stage is controlled using a state-of-the-art integrated control-IC to guarantee best efficiency and unity power factor over a wide operating range. The DC-DC stage uses soft switching resonant techniques in conjunction with synchronous rectification. An active OR-ing device on the output ensures no reverse load current and renders the supply ideally suited for operation in redundant power systems. The always-on standby output with selectable voltage level (3.3/5 V) provides power to external power distribution and management controllers. Its protection with an active OR-ing device provides for maximum reliability. Status information is provided with front-panel LEDs. In addition, the power supply can be controlled and the fan speed set via the 2 I C bus. It allows full monitoring of the supply, including input and output voltage, current, power, and inside temperatures. Cooling is managed by a fan controlled by the DSP controller. The fan speed is adjusted automatically depending on the actual 2 power demand and supply temperature and can be overridden through the I C bus. L V1 DC Vsb VsbSense+ Filter PFC Buck VsbSense- DC N GND PE Aux EEPROM Converter FAN V1Sense+ V1Sense- Digital Digital Prim Sec I2C Communication Bus Controls Controls APS Logic Signals Figure 1. PFE600-12-054xA Block Diagram Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability, and cause permanent damage to the supply. PARAMETER CONDITIONS / DESCRIPTION MIN MAX UNITS Vi maxc Maximum Input Continuous 264 VAC tech.support psbel.com PWM PWM