09 5281 00 04 Binder

Product data sheet Automation technology - sensors and actuators Product description Contacts: 4, Adaptor, female connector M8 - male connector M12 Area Connecting cords Series 765 Order number 09 5281 00 04 Illustration Scale drawing Contact arrangement Technical data General values Electrical values Connector design adapter Rated current (40 C) 4 A Connector locking system bolted Rated voltage 30 V Termination plugable Rated impulse voltage 800 V Upper limit temperature 85 C Pollution degree 3 Lower limit temperature -25 C Overvoltage category II Insulating material group II Volume resistivity 3 m EMC compliance not shielded Degree of protection IP67 Mechanical operation > 100 Mating cycles Material Contact material Pin: CuZn (brass), Socket: CuSn (bronze) Contact plating Au (gold) Contact body material PA/PUR Housing material Macromelt Date: 2018-10-11 - Page 1 of 2Product data sheet Automation technology - sensors and actuators Product description Contacts: 4, Adaptor, female connector M8 - male connector M12 Area Connecting cords Series 765 Order number 09 5281 00 04 Security notices The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications. Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to Technical support in the Download Centre. To lock the cable connector to the equipment connector, the threaded ring is tightened until it is finger-tight (approx. 50 cNm). Date: 2018-10-11 - Page 2 of 2 Powered by TCPDF (www.tcpdf.org)