SGLC-250-D BE Bivar

REVISIONS NOTES: REV. DESCRIPTION DATE APPROVED 1. COMPONENTS SHIPPED UNASSEMBLED. A ENGINEERING RELEASE 3/1/2021 A.V. 2. MATERIAL: POLYCARBONATE LENS & IP RATED POLYURETHANE SEALING GASKET WITH ADHESIVE. 3. ASSEMBLY INSTRUCTIONS FOR IP68 RATING - CLEAN PANEL SURFACE WITH ALCOHOL - PEEL LINER TAPE OFF OF THE TOP OF THE SEALING GASKET AND KEEP ON PLASTIC SHEET - APPLY SEALING GASKET TO PANEL HOLE AS CENTERED AS POSSIBLE AND PEEL PLASTIC SHEET SLOWLY AWAY - INSERT LENS CAP INTO PANEL UNTIL LENS TABS ENGAGE WITH PANEL ON OPPOSITE SIDE PANEL (NOT PART NUMBER CONFIGURATION INCLUDED) SGLC-250-D-XX .250 6.4mm PANEL LENS COLOR SEALING DOME LENS SEE TABLE 1 GASKET LENS TABLE 1 - LENS APPEARANCE CAP ORDER CODE LENS APPEARANCE (BLANK) CLEAR BE TINTED BLUE GN TINTED GREEN RD TINTED RED YW TINTED YELLOW +.001 +0.0 .265IN 6.7mm -.002 -0.1 .412IN 10.5mm .040IN 1.0mm SEALING GASKET O.D034IN 0.9mm .101IN 2.6mm RECOMMENDED LENS MOUNTING HOLE PANEL THICKNESS: .250IN 6.35mm MAX. CUSTOMER USE DRAWING .362IN 9.2mm .280IN 7.1mm .349IN 8.9mm LENS FLANGE O.D. STANDARD TOLERANCE .262IN 6.7mm (UNLESS OTHERWISE SPECIFIED) DECIMALS ANGULAR 4 THOMAS, IRVINE, CA. 92618 .X .1 SAMPLE PART NUMBER X 1 TEL: (949) 951-8808 FAX: (949) 951-3974 .XX .01 TITLE: .XXX .005 IP68 LENS CAP SGLC-250-D-GN DESIGNED: DATE: REVISION: DRAWING NO: K. BARON 3/1/2021 SGLC-250-D-XX A .250 6.4mm PANEL TINTED GREEN LENS REVISED: DATE: CAGE CODE: SHEET A DOME LENS N/A SIZE 32559 CHECKED: DATE: SCALE: 2:1 SHEET OF1 2 A. VALDEZ 3/1/2021 CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWINGFOR OPTIMAL LIGHT DISTRIBUTION FOLLOW PRODUCT PLACEMENT INSTRUCTIONS LISTED BELOW: PRODUCTS INSERTED COMPLETELY INSIDE LENS CAP: PRODUCTS RECESSED 0.2 FROM INSIDE SURFACE: * LPR5 LIGHT PIPE SERIES * 1.8mm DISCRETE LEDS * 5mm DISCRETE LEDS * 3mm DISCRETE LEDS * LPR4 LIGHT PIPE SERIES * LPV4 LIGHT PIPE SERIES * VLP LIGHT PIPE SERIES * SLP3 LIGHT PIPE SERIES * RLP1 LIGHT PIPE SERIES CUSTOMER USE DRAWING REVISION: DRAWING NO: CAGE CODE: 32559 SGLC-250-D-XX A SCALE: 2:1 SHEET OF2 2 SHEET SIZE: A CAD GENERATED DOCUMENT, DO NOT MEASURE DRAWING