2038-15-SM-RPLF Bourns

Features n High surge current rating, low insertion loss n Balanced Mini-TRIGARD (5 mm diameter, 7.5 mm length) n Stable breakdown throughout life n Ideal for board level protection of n Recognized broadband circuits n RoHS compliant* versions available n Symmetrical breakdown voltage (L-L, L-G) n Leadless, surface mount for economical assembly 2038 Series Miniature Symmetrical 3-Electrode Surface Mount Gas Discharge Tube Bourns offers a symmetrical surface mount (SM) 3-electrode GDT surge protection device. The industry-leading quality and features of the TM Bourns miniature-TRIGARD series GDT continue in the 2038 symmetrical version. The 2038 series is ideal for board level protection of high bandwidth applications such as xDSL, cable broadband and high speed Ethernet, due to its symmetrical turn on characteristics as well as high energy-handling capability, long and stable life performance and low capacitance of less than 1 pF. The 2038 series breakdown voltages are nearly equal line to line as well as line to ground. Bourns Gas Discharge Tubes (GDT) are designed to prevent damage from transient disturbances by acting as a crowbar in creating a virtual short-to-ground circuit during conduction. When an electrical surge exceeds the defined breakdown voltage level of the GDT, the gas becomes ionized and rapid conduction takes place. When the surge passes and the system voltage returns to normal levels, the GDT returns to its high-impedance (off) state. Characteristics Test Methods per ITU-T K.12, IEEE C62.31 and IEC 61643-311 GDT standards. Model No. Characteristic 2038-15-SM 2038-20-SM 2038-23-SM 2038-30-SM 2038-35-SM DC Sparkover 25 % 100 V/s 150 V 200 V 230 V 300 V 350 V (1) L1/L2 to Gnd (2) Typical Impulse Sparkover L1/L2 to Gnd 100V/s 350 V 425 V 450 V 500 V 600 V 1000V/s 500 V 575 V 600 V 650 V 750 V Model No. Characteristic 2038-42-SM 2038-47-SM 2038-60-SM 2038-80-SM 2038-110-SM DC Sparkover 25 % 100 V/s 420 V 470 V 600 V 800 V 1100 V (1) L1/L2 to Gnd (2) Typical Impulse Sparkover L1/L2 to Gnd 100V/s 675 V 750 V 850 V 1150 V 1500 V 1000V/s 850 V 950 V 1100 V 1400 V 1700 V Impulse Transverse Delay ............................... 100 V/s ............................................................< 50 ns 9 Insulation Resistance (IR) ............................... 100 V ................................................................> 10 Glow Voltage ................................................... 10 mA ................................................................~ 70 V Arc Voltage ...................................................... 1 A .....................................................................~ 10 V Glow-Arc Transition Current .......................................................................................................< 0.5 A Capacitance..................................................... 1 MHz ...............................................................< 1 pF (3) DC Holdover Voltage ................................... 135 V (80 V for Model 2038-15) .......................< 150 ms (4) Impulse Discharge Current .............................. 10000 A, 8/20 s ...........................................1 operation min. 5000 A, 8/20 s .................................................10 operations 200 A, 10/1000 s .............................................300 operations 200 A, 10/700 s ..............................................500 operations 10 A, 10/1000 s ..............................................1500 operations (4) Alternating Discharge Current ......................... 10 Arms, 1 s ..................................................1 operation min. 5 Arms, 1 s ........................................................10 operations Operating Temperature ...............................................................................................................-40 to +90 C Climatic Category (IEC 60068-1)................................................................................................40/90/21 Moisture Sensitivity Level ...........................................................................................................1 ESD Classification (HBM) ...........................................................................................................6 Notes: Operating characteristics per RUS PE-80 and Telcordia GR 1361 2038-15 through 2038-35 UL Recognized , file E153537. available on request. 2038-80 & 2038-110 UL Recognized , file E313168 (UL 1449). At delivery AQL 0.65 Level II, DIN ISO 2859. The rated discharge current for Mini-TRIGARD GDTs is the total Bourns recommends reflowing surface mount devices per IPC/JEDEC current equally divided between each line to ground. J-STD-020 rev D. Surface Mount (SM) parts may show a temporary increase in (1) Line to Line DC Sparkover tolerance typically less than +30 % at DCBD after the solder reflow process. Most devices will recover 100 V/s. within 24 hours time. It should be noted that there is no quality (2) Impulse Sparkover voltage is defined as typical values of distribution. defect nor change in protection levels during the temporary change (3) Network applied. in DCBD. (4) DC Sparkover may exceed 30 % but will continue to protect without 8 Sparkover limits after life 30 %. IR >10 . venting. *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.2038 Series Miniature Symmetrical 3-Electrode Surface Mount Gas Discharge Tube Product Dimensions Recommended Pad Layout 7.5 0.26 7.5 0.26 (.295 .010)(.295 .010) 1.6 1.6 1.3 0.13 1.3 0.13 (.063) (.063) (.051 .005)(.051 .005) 5.6 5.6 5.0 0.3 5.0 0.3 (.220) (.220) (.197 .012)(.197 .012) 0.51 0.05 0.51 0.05 (.020 .002) (.020 .002) 3.3 3.3 (.130) (.130) 8.2 8.2 (.323) (.323) MM DIMENSIONS: (INCHES) How to Order 2038 - xx - SM - RP LF Model Number Designator Voltage (Divided by 10) Surface Mount Packaging Options Blank = Bulk Packaging (Standard) RP = Reelpack (Optional) RP2 = Reelpack (Optional) RoHS Compliant Option Blank = Standard Product LF = RoHS Compliant Product Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.