3224W-1-205E Bourns

3 2 2 4 W 100 Features n Surface Mount 4 mm Square / Multiturn n 4mm design meets EIA/EIAJ/IPC/VECI Cermet / Industrial / Sealed SMD standard trimmer footprint n Halogen free** with date code 114 n Low CRV - 1 % n Sealed to withstand board wash n RoHS compliant* - see processing processing information on RoHS compliant surface mount trimmers n Pick and place centering design, with flush adjustment n For trimmer applications/processing guidelines, click here 3224 - 4 mm SMD Trimpot Trimming Potentiometer Electrical Characteristics Product Dimensions Standard Resistance Range .......................................... 10 to 2 megohm 1.5 1.5 DIA. 1 DIA. 1 (see standard resistance table) (.060) 1.2 (.060) 2 1.2 2 Resistance Tolerance ....................10 % std. (.047) (.047) Absolute Min. Resistance .....1 % or 2.0 ohms 4.8 4.8 (.190) (whichever is greater) (.190) Contact Resistance Variation ....................................1 % or 3 ohms max. 2.4 2.7 2.6 2.4 3 2.3 3 5.0 2.3 (.095) Resolution ..........................Essentially Infinite (.108) (.102) (.095) (.090) 6.0 (.195) (.090) Insulation Resistance ........................500 vdc. (.236) 4.6 100 megohms min. 4.6 (.180) ADJUSTMENT SLOT ADJUSTMENT SLOT (.180) Dielectric Strength 0.6 0.6 WIDE Sea Level .......................600 vac (1 minute) 3.71 WIDE (.022) (.022) 3.9 (.146) Adjustment Angle ..................... 12 turns nom. 0.5 (.152) 0.5 DEEP X X DEEP (.020) (.020) 0.2 0.8 Environmental Characteristics (.032) 0.13 (.007) (.005) 0.5 Power Rating (300 volts max.) 2.0 TYP. 1.3 3 PLCS 1.0 3 PLCS. (.020) 1.14 (.079) 85 C .............................................0.25 watt 4.0 (.050) (.039) 5.2 (.045) 150 C ................................................0 watt (.157) 2 PLCS. (.205) Temperature Range ............-65 C to +150 C Temperature Coefficient ............ 100 ppm/C Seal Test .......... 85 C Fluorinert /60 seconds 2.0 Humidity ................MIL-STD 202 Method 106 2.0 1.3 (.079) 2.3 1.3 0.9 1.3 2.3 TRS 2 % IR 10 megohms (.079) (.050) 0.9 (.090) (.050) (.050) (.090) 1.3 (.034) Vibration .............. 20 G TRS1 % VRS 1 % 2 PLCS. 0.5 (.034) 0.5 2 PLCS. (.050) 2 PLCS. 2 PLCS. (.020) Shock ................ 100 G TRS 1 % VRS1 % (.020) 0.2 0.2 Load Life .... 85 C rated power 1,000 hours (.007) (.007) TRS .......3 ohms or 3 % (whichever is greater) Rotational Cycling ......................... 200 cycles TRS .......3 ohms or 3 % (whichever is greater) Thermal Shock .................................. 5 cycles 3.9 0.8 2.5 2 PLCS TRS2 % VRS1 % (.155) (.032) (.100) 5.1 1.3 5.1 3.5 3.5 Moisture Sensitivity Level ......................... N/A (.050) 1 (.139) (.200) 1 (.139) (.200) ESD Classification ........................................ 2 1.3 1.2 (.050) (.047) 4.8 4.8 2.5 Physical Characteristics (.190) (.190) (.100) 2 2 Mechanical Stop ...........................Wiper idles 1.5 1.2 Torque ..................................... 180 g-cm max. 3 1.0 (.047) 2.6 (.060) 1.0 Weight ........................Approximately 0.01 oz. 3 PLCS. 3 PLCS. DIA. (.040) (.103) (.040) Marking ......................... Manufacturers code, ADJUSTMENT SLOT 5.3 resistance code and date code 0.6 (.208) 3.9 5.3 WIDE (.022) Solderability ....................... Per MIL-STD-202, ADJUSTMENT SLOT (.155) (.208) 0.7 0.5 Method 208 0.6 (.028) DEEP X WIDE (.020) (.022) Wiper ........................50 % (Actual TR) 10 % 0.5 5.7 Flammability .......................................UL94V0 DEEP X (.020) (.225) Pushover Strength J, G ..................................................4.4 lbs. 0.8 0.2 W, X ......................................................1 lb. 1.3 1.3 2 PLCS. (.032) (.007) 2 PLCS. Adjustment Tool ...................................... H-91 (.050) 0.2 (.050) 5.1 (.007) 2.9 (.200) 2.0 (.114) MM 2.0 (.079) DIMENSIONS: (INCHES) (.079) 0.25 TOLERANCES: EXCEPT WHERE NOTED 1.6 (.010) (.061) 2.5 1.9 0.8 TYP. 0.8 3 PLCS. 2 PLCS. (.100) (.075) 2 PLCS. (.032) 2.5 (.032) (.100) WIPER 2 MM DIMENSIONS: (INCHES) CW CCW 3 1 CLOCKWISE * RoHS Directive 2015/863, Mar. 31, 2015 and Annex ** Bourns follows the prevailing definition of halogen free in the industry. Bourns considers a product to be halogen free if (a) the Bromine (Br ) content is 900 ppm or less (b) the Chlorine ( Cl ) content or less is 900and ppm (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Trimpot is a trademark of Bourns, Inc. Fluorinert is a registered trademark of 3M Co. WARNING Cancer and Specifications are subject to change without notice. Users should verify actual device performance in their specific Reproductive Harm applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the www.P65Warnings.ca.gov last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 8 1 1 CAdditional Features n Top and side adjust styles n J-hook, and gull-wing 3224 - 4 mm SMD Trimpot Trimming Potentiometer 3312 - 2 mm SMD Trimming Potentiometer Packaging Specifications W Style X Style J & G Styles .04 MAX. 6.09 6.35 (.002) MAX. (.240) (.250) .05 MAX. MAX. (.002) 4.5 .35 MAX. MAX 5.52 .05 (.177) (.014) (.217 .002) 7.50 .05 7.50 5.55 .10 (J) (.295 .002) (.295) 1.5 + .10/ .00 (.219 .004) DIA. 1.5 + .10/ .00 (.059 + .004/ .000) DIA. 6.25 .10 (G) 1.5 + .10/ .00 (.059 + .004/ .000) DIA. (.246 .004) 4.90 .10 (.059 + .004/ .000) 4.00 .20 (.193 .004) 4.00 .20 (.157 .008) 4.00 (.157 .008) 6.70 (.157) (.264) 5.10 .10 4.05 .12 2.00 .05 (.201 .004) 2.00 .05 (.159 .005) (.079 .002) (.079 .002) 2.00 (.079) 12.00 (.472) 8.00 .10 12.00 .10 (.315 .004) (.472 .004) 1.75 .10 (.069 .004) 12.00 .30 1.75 .10 1.75 (.472 .012) (.069 .004) 16.00 .30 (.069) 8.6 TAPE (.630 .012) (.339) TAPE 16.0 0.30 W & X Style Reel 1.78 .25 EQUAL SPACED (.630 .012) (.070 .010) 3 PLCS. TAPE 21.01 .79 DIA. 13.0 .51 DIA. (.827 .031) (.512 .020) 2.67 .25 How To Order (.105 .010) 3224 J - 1 - 502 E Model Style 59.18 2.03 Standard or Modified (2.330 .080) Product Indicator -1= IR Reflow (standard) -2= Wave Solderable 16.4 + 1.81/ -.000 -FW5= .070 .010 Shaft Extension (.646 .070/ -.000) REEL Resistance Code 178 2.0 DIA.* Embossed Tape Designator (7.00 .008) * Embossed Tape Designator 12.4 + 2.01/ -.000 E = Style J, G: 500 pcs./7 reel (standard) **Embossed Tape Designator 330.2 2.0 (.488 + .079/ -.000) Style W: 250 pcs./7 reel (standard) DIA.** (See How To Order chart for further information.) (13.00 .008) Style X: 200 pcs./7 reel (standard) Cover tape peel strength: Meets EIA specification 481. G = Style J, G: 1500 pcs./13 reel (standard) REEL Style W: 1000 pcs./13 reel (standard) * Embossed Tape Designator Style X: 850 pcs./13 reel (standard) **Embossed Tape Designator Blank = Style J, G: 1500 pcs./13 reel (FW5) (See How To Order chart for further information.) Style W, X: 600 pcs./13 reel (FW5) Cover tape peel strength: Meets EIA specification 481. Consult factory for other available options. -2 has a treated stainless steel shaft. Tape and reel material meets Antistatic ANSI/ Standard Resistance Table ESD 5541-2003 packaging standards. Resistance Resistance Resistance Resistance (Ohms) Code (Ohms) Code 10 100 5,000 502 20 200 10,000 103 50 500 20,000 203 50,000 503 100 101 REV. 08/19 100,000 104 200 201 Trimpot is a registered trademark of Bourns, Inc. 500 501 200,000 204 Specifications are subject to change without notice. 1,000 102 500,000 504 Users should verify actual device performance in their 2,000 202 1,000,000 105 2,000,000 205 specicfi applications. The products described herein and this document are subject to specific legal disclaimers as Popular distribution values listed in boldface. set forth on the last page of this document, and at Special resistances available. www.bourns.com/docs/legal/disclaimer.pdf.