Features n Marking on contrasting background for n RoHS compliant* permanent identification n Low profile is compatible with DIPs n Wide assortment of pin packages enhances design flexibility n Ammo-pak packaging available n Recommended for rosin flux and solvent clean or no clean flux processes 4600X Series - Thick Film Conformal SIPs 4600X PACKAGE POWER TEMPERATURE Package Power Temp. Derating Curve Product Characteristics Product Dimensions DERATING CURVE Resistance Range 5.08 .................... 10 ohms to 10 megohms A (.200) MAXIMUM 3.50 Maximum Operating Voltage .........100 V MAX. Temperature Coefficient of Resistance 50 to 2.2 megohms .....100 ppm/C 3.00 PIN 1 below 50 .....................250 ppm/C REF. above 2.2 megohms.......250 ppm/C MAX. 1.24 2.50 3.3 +0.5/-0.3 BOTH ENDS(.049) TCR Tracking.........................50 ppm/C (.130 +.020/ -.012) 0.50 0.10 maximum equal values 2.00 TYP. (.020 .004) 4614X Resistor Tolerance ............... See circuits 2.54 .07 4612X Insulation Resistance 1.50 (.100 .003*) 4610X ................ 10,000 megohms minimum TYP. Pin A Maximum NON-ACCUM. Dielectric Withstanding Voltage 4608X Count mm (Inches) 1.00 ...........................................200 VRMS 4606X 4 10.11 (.398) 5 12.65 (.498) Operating Temperature 4604X .50 6 15.19 (.598) 2.49 ................................-55 C to +125 C 7 17.73 (.698) MAX. (.098) 8 20.27 (.798) 9 22.81 (.898) Environmental Characteristics 0725 0 125 10 25.35 (.998) 11 27.89 (1.098) AMBIENT TEMPERATURE ( C ) TESTS PER MIL-STD-202 ...... R MAX. 12 30.43 (1.198) .254 .050 Short Time Overload..................0.25 % 13 32.97 (1.298) MAX. 14 35.51 (1.398) (.010 .002) Load Life ....................................1.00 % Package Power Ratings (Watts) Moisture Resistance ..................0.50 % Resistance to Soldering Heat Ambient Ambient Maximum package length is equal to 2.54mm (.100 ) times the ...............................................0.50 % Temp. Temp. number of pins, less .005mm (.002 ). Terminal Strength ......................0.25 % Pkg. 70 C Pkg. 70 C Governing dimensions are in metric. Dimensions in parentheses Thermal Shock ..........................0.25 % 4604X 0.50 4610X 1.25 are inches and are approximate. 4605X 0.63 4611X 1.38 Physical Characteristics *Terminal centerline to centerline measurements made at point of 4606X 0.75 4612X 1.50 emergence of the lead from the body. Flammability ........ Conforms to UL94V-0 4607X 0.88 4613X 1.63 Body Material....................... Epoxy resin 4608X 1.00 4614X 1.75 Standard Packaging 4609X 1.13 .................. Bulk, Ammo-pak available For Standard Values Used in Capacitors, Inductors, and Resistors, How To Order Typical Part Marking click here. 46 06 X - 101 - 222 LF Represents total content. Layout may vary. Model (46 = Conformal Part Number Marking SIP) 4606X-101-RC 6X-1-RC Number of Pins 4608X-102-RC 8X-2-RC Physical Configuration (X = Thick Film Low Profile) 4610X-104-RC/RC 10X-4-RC/RC Electrical Configuration 101 = Bussed RC = ohmic value, 3-digit resistance 102 = Isolated code. 104 = Dual Terminator AP1 = Bussed Ammo** AP2 = Isolated Ammo** CIRCUIT NUMBER OF PINS AP4 = Dual Ammo** RESISTANCE 6X-2-222 YYWW CODE Resistance Code First 2 digits are significant PIN ONE DATE CODE INDICATOR Third digit represents the MANUFACTURER S number of zeros to follow. TRADEMARK Resistance Tolerance Blank = 2 % (see Resistance Tolerance on next page for resistance range) F = 1 % (100 ohms - 5 megohms) Terminations All electrical configurations EXCEPT 104 & AP4: LF = Sn/Ag/Cu-plated (RoHS compliant) ONLY electrical configurations 104 & AP4: WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov L = Sn/Ag/Cu-plated (RoHS compliant) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Consult factory for other available options. Specifications are subject to change without notice. **Available for packages with 10 pins or less. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WATTSFor information on specific applications, download Bourns application notes: n DRAM Applications n Dual Terminator Resistor Networks n R/2R Ladder Networks n SCSI Applications 4600X Series - Thick Film Conformal SIPs Isolated Resistors (102 Circuit) Bussed Resistors (101 Circuit) Dual Terminator (104 Circuit) Model 4600X-102-RC Model 4600X-101-RC Model 4600X-104-R1/R2 4, 6, 8, 10, 12, 14 Pin 4 through 14 Pin 4 through 14 Pin ISOLATED RESISTORS 102 CIRCUIT BUSSED RESISTORS 101 CIRCUIT DUAL TERMINATOR 104 CIRCUIT ... R2 R2 R2 R2 R2 R2 1 46 12 14 1 14 R1 R1 R1 R1 R1 R1 1 8 These models incorporate 3 to 13 These models incorporate 2 to 7 The 4608X-104 (shown above) is an 8- thick-film resistors of equal value, each isolated thick-film resistors of equal pin configuration and terminates 6 lines. connected between a common bus value, each connected between two Pins 1 and 8 are common for ground (pin 1) and a separate pin. pins. and power, respectively. Twelve thick- film resistors are paired in series be - Resistance Tolerance Resistance Tolerance tween the common lines (pins 1 and 8). 10 ohms to 49 ohms ...................1 ohm 10 ohms to 49 ohms ...................1 ohm Resistance Tolerance 50 ohms to 5 megohms ................ 2 %* 50 ohms to 5 megohms ................ 2 %* Above 5 megohms..........................5 % Above 5 megohms..........................5 % Below 100 ohms ....................... 2 ohms 100 ohms to 5 megohms .............. 2 %* Power Rating per Resistor Power Rating per Resistor Above 5 megohms..........................5 % At 70 C .................................. 0.20 watt At 70 C .................................. 0.30 watt Power Rating per Resistor Power Temperature Derating Curve Power Temperature Derating Curve At 70 C .................................. 0.20 watt .60 .60 Power Temperature Derating Curve .50 .50 .60 .40 .40 .50 .30 .30 .40 .20 .20 .30 .10 .10 .20 0725 0 125 0725 0 125 .10 AMBIENT TEMPERATURE ( C ) AMBIENT TEMPERATURE ( C ) 0725 0 125 AMBIENT TEMPERATURE ( C ) Popular Resistance Values (101, 102 Circuits)** Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Popular Resistance Values (104 Circuit)** 10 100 180 181 1,800 182 15,000 153 120,000 124 22 220 220 221 2,000 202 18,000 183 150,000 154 Resistance 27 270 270 271 2,200 222 20,000 203 180,000 184 Ohms Code 33 330 330 331 2,700 272 22,000 223 220,000 224 R R R R 1 2 1 2 39 390 390 391 3,300 332 27,000 273 270,000 274 160 240 161 241 47 470 470 471 3,900 392 33,000 333 330,000 334 180 390 181 391 56 560 560 561 4,700 472 39,000 393 390,000 394 220 270 221 271 68 680 680 681 5,600 562 47,000 473 470,000 474 220 330 221 331 82 820 820 821 6,800 682 56,000 563 560,000 564 330 390 331 391 100 101 1,000 102 8,200 822 68,000 683 680,000 684 330 470 331 471 120 121 1,200 122 10,000 103 82,000 823 820,000 824 3,000 6,200 302 622 150 151 1,500 152 12,000 123 100,000 104 1,000,000 105 * 1 % tolerance is available by adding suffix code F after the resistance code. **Non-standard values available, within resistance range. REV. 10/1/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WATTS WATTS WATTS