CHV0805AFX-1003ELF Bourns

1504 Features Applications AUTOMOTIVE GRADE n Thick film n Higher voltage applications n High working voltage n Consumer electronics n Wide resistance range n RoHS compliant* n UL/IEC 60950 & 60065 compatible n UL 1676 recognized n AEC-Q200 compliant CHV-A Series Thick Film High Voltage Chip Resistors Electrical Characteristics Additional Information Click these links for more information: Model Specification CHV- CHV- CHV- CHV- CHV- 0603A 0805A 1206A 2010A 2512A Power Rating 70 C 0.1 W 0.125 W 0.25 W 0.5 W 1.0 W PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT LIBRARY Operating Temperature Range -55 C to +155 C Maximum Working Voltage 200 V 400 V 800 V 2000 V 3000 V Agency Recognition Maximum Overload Voltage 400 V 800 V 1600 V 3000 V 4000 V Description 1 % 100 kW ~ 10 MW UL1676 File Number: E466353 E-96 + E-24 Resistance Range 5 % 100 kW ~ 22 MW 100 kW ~ 100 MW How to Order E-24 1 % 100 PPM/C CHV 2512 A - F X - 1000 E LF Temperature Coefficient 5 % 200 PPM/C Model (CHV = Thick Film High Voltage Derating Curve Chip Resistor Size 0603 2010 0805 2512 100 1206 80 Feature A = AEC-Q200 60 compliant 40 Resistance Tolerance F = 1 % (Use with X 20 TCR Code) J = 5 % (Use with W 0 TCR Code) -55 0 155 70 TCR Ambient temperature (C) X = 100 PPM/C W = 200 PPM/C Resistance Value 1 % Tolerance: First three digits are significant, fourth digit represents the number of zeroes to follow 5 % Tolerance: First two digits are significant, third digit represents the number of zeroes to follow Packaging E = Paper tape: 5,000 pcs. on 7 plastic reel (CHV0603A, CHV0805A, CHV1206A) 4,000 pcs. on 7 plastic reel (CHV2010A, CHV2512A) Termination LF = Tin-plated (RoHS compliant) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS and AEC-Q200 COMPLIANT Rated power in percentage (%) CHV-A Series Thick Film High Voltage Chip Resistors Environmental Characteristics Test Specification Test Method (AEC-Q200, IEC 60115) AEC-Q200 TABLE 7.3 High Temperature Exposure J: D R (3 % + 0.1 ) 1000 hrs. T=125 . Unpowered. (Storage) F: D R (1 % + 0.05 ) Measurement at 24 2 hours after test conclusion. AEC-Q200 TABLE 7.4 D R (1 % + 0.1 ) Temperature Cycling* 1000 Cycles (-55 C to +125 C). No mechanical damage Measurement at 24 2 hours after test conclusion. AEC-Q200 TABLE 7.6 Moisture Resistance D R (1 %+0.1 ) Test 65 / 80~100 % RH / 10 cycles. Measurement at 24 2 hours after test conclusion. (t=24 hrs/cycle) AEC-Q200 TABLE 7.7 J: D R (5 % + 0.1 ) 1000 hours 85 / 85 % RH. Biased Humidity F: D R (3 % + 0.05 ) 10% of operating power. VCR within the spec. Measurement at 24 2 hours after test conclusion. J: D R (5 % + 0.1 ) AEC-Q200 TABLE 7.8 Operational Life F: D R (3 % + 0.0.5 ) Test 1000 hrs. Ta =125 at specified rated power. VCR within the spec. Measurement at 24 2 hours after test conclusion. AEC-Q200 TABLE 7.13 Within product specification tolerance Mechanical Shock Test Peak value: 100 gs, Wave: Hail-sine, and no visible damage. Duration: 6 ms, Velocity:12.3 ft/sec. AEC-Q200 TABLE 7.14 Vibration No mechanical damage. 5 gs for 20 min., 12 cycles each of 3 orientations. Test from 10-2000 Hz. AEC-Q200 TABLE 7.15 D R (1 % + 0.1 ) Resistance to Solder Heat* Solder dipping 270 5 for No mechanical damage. 10 sec. 1 sec. J: D R (1 % + 0.1 ) AEC-Q200 TABLE 7.16 Thermal Shock F: D R (0.5 % + 0.05 ) -55 to 155 / dwell time 15 min max. No mechanical damage. Transfer time 20 sec. / 300 cycles. D R (1 % + 0.1 ) AEC-Q200-002 ESD No mechanical damage. Test contact min. 1 kV AEC-Q200 TABLE 7.18 Over 95 % of termination must be a) Baking 155 4 hours, dipping 235 5 sec. Solderability* b) Steam 1 hour, dipping 215 5 sec. covered with solder. c) Steam 1 hour, dipping 260 7 sec. AEC-Q200 TABLE 7.20 Flammability Refer to UL-94. UL-94 V-0 or V-1 are acceptable J: D R (1 % + 0.1 ) AEC-Q200 TABLE 7.21 Board Flex* F: D R (0.5 % + 0.05 ) Bending 2 mm (CHV2512A, 2010A, 1210A, 1206A) No mechanical damage. 3 mm (CHV0805A, 0603A) AEC-Q200 TABLE 7.22 Terminal Strength No mechanical damage. Force 1 Kg for 60 seconds. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.