Product Information

CR0402-J/-4R3GLF

Product Image X-ON

Datasheet
Thick Film Resistors - SMD CHIP RESISTOR

Manufacturer: Bourns
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

10000: USD 0.0047 ea
Line Total: USD 47

61523 - Global Stock
Ships to you between
Fri. 16 Jun to Thu. 22 Jun
MOQ: 10000  Multiples: 10000
Pack Size: 10000
Availability Price Quantity
61523 - Global Stock


Ships to you between Fri. 16 Jun to Thu. 22 Jun

MOQ : 10000
Multiples : 10000
10000 : USD 0.0047
20000 : USD 0.0045
40000 : USD 0.0036
80000 : USD 0.0031

     
Manufacturer
Bourns
Product Category
Thick Film Resistors - SMD
RoHS - XON
Y Icon ROHS
Packaging
Reel
Series
Cr0402
Resistance
4.3 Ohms
Power Rating
62.5 mW (1/16 w)
Tolerance
5 %
Temperature Coefficient
- 250 PPM/C , + 500 PPM/C
Voltage Rating
50 V
Case Code - in
0402
Case Code - mm
1005
Operating Temperature Range
- 55 C to + 125 C
Package / Case
0402 (1005 METRIC)
Product
Thick Film Resistors Smd
Type
Chip Resistors
Brand
Bourns
Case Height
0.35 mm
Case Length
1 mm
Case Width
0.5 mm
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image 1.5SMC15CA
TVS Diodes - Transient Voltage Suppressors 15V 1500W BiDir
Stock : 1
Hot Stock Image 2017-15-SMH-RPLF
Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 150V FLAT GDT Horizontal
Stock : 1
Stock Image 1669-06
Surge Suppressors 2000pF Single Ended
Stock : 1
Stock Image 1530-1D-W
Bourns Surge Suppressors ETHERNET PoE DIN MntGrnd Wire
Stock : 1
Stock Image 1110-331K-RC
High Current RF Choke Bobbin Core 330uH 10% 1KHz Ferrite 1.3A 336mOhm DCR RDL
Stock : 1
Stock Image 1250-2S-120
Surge Suppressors 120VAC 2W+G 2 Protected Poles
Stock : 1
Stock Image 1250-3S-230
Surge Suppressors 230VAC 3W+G 3 Protected Poles
Stock : 1
Stock Image 1130-101K-RC
High Current RF Choke Bobbin Core 100uH 10% 1KHz Ferrite 9A 34mOhm DCR RDL
Stock : 1
Stock Image 1120-6R8M-RC
Fixed Inductors 6.8uH 20%
Stock : 0
Stock Image 2037-60-B5
Gas Discharge Tubes - GDTs / Gas Plasma Arrestors Sparkover100V/s 600V Miniature 2 Pole
Stock : 1
Image Description
Stock Image RMCF1206FT34R8

34.8 Ohms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200 Thick Film
Stock : 1

Stock Image 1622869-1

Thick Film Resistors - SMD 1.2KOhms 1/10W 50V
Stock : 1

Stock Image CRCW040234R0FKED

34 Ohms ±1% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film
Stock : 1

Stock Image CRCW06032K26FKEA

Thick Film Resistors - SMD 1/10watt 2.26Kohms 1%
Stock : 20000

Stock Image CRCW060336R5FKEA

36.5 Ohms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film
Stock : 9890

Stock Image CRCW060342R2FKEA

42.2 Ohms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film
Stock : 0

Stock Image CRCW06034R70FKEA

Thick Film Resistors - SMD 1/10watt 4.7ohms 1%
Stock : 1

Stock Image CRCW08058K20FKEA

8.2 kOhms ±1% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film
Stock : 30000

Stock Image WR06X3570FTL

Thick Film Resistors - SMD 0603 357R 1% Lead Free
Stock : 1

Stock Image CRCW040290R9FKEDC

Thick Film Resistors - SMD 1/16watt 90.9ohms 1% Commercial Use
Stock : 1

Features n Small package dimensions n Suitable for most types of soldering processes n RoHS compliant* n Standard packaging on paper tape and reel n Power rating at 70 C = 1/16 W n Tight dimensional tolerances n Three layer termination process with nickel barrier prevents leaching and provides excellent solderability CR0402 - Chip Resistor Electrical Characteristics Derating Curve Power Rating 70 C ................1/16 W Operating Temperature Range 100 ................................-55 C to +155 C Derated to 0 Load at ..................+155 C 80 Maximum Working Voltage ..............50 V Maximum Overload Voltage ..........100 V 60 Resistance Range 1 %, E-96 40 and E-24 ...... 10 ohms to 10 megohms 5 %, E-24 ........ 1 ohm to 20 megohms 20 Zero Ohm Jumper ............<0.05 ohms Temperature Coefficient 0 -55 070 155 1 % ........10 R 1 M 100 ppm/ 1 M < R 10 M 200 ppm/ Ambient Temperature (C) 5 % ......10 R 10 M 200 ppm/ 10 M < R 20 M 400 ppm/ Standard Values Part Marking System 1 R < 10 -200 to +500 ppm/C AEC-Q200 ..................... Contact Bourns For Standard Values Used in Capac- No Marking on the CR0402 Chip to confirm availability itors, Inductors, and Resistors, click Resistors. here. Dimensional Drawings 0.20 0.10 0.20 0.10 Resistor (Ru02) Overcoat (0.008 0.004) (0.008 0.004) (Jumper chip is a conductor) 0.35 0.05 (0.014 0.002) 0.50 0.05 0.25 0.10 0.25 0.10 (0.020 0.002) (0.010 0.004) (0.010 0.004) Alumina Substrate 1.00 0.10 (0.040 0.004) Internal Electrode (Ag) Secondary Electrode (Nickel Plated) MM DIMENSIONS: External Electrode (INCHES) (tin-plated) Performance Characteristics Test Limits DR Test Procedure Method 1 % 5 % -55 for 30 minutes, +155 for 30 minutes, Thermal Shock IEC60115-1-4.19 (0.5 % + 0.05 ) (1 % + 0.05 ) 5 cycles Short Time Overload 2.5 X rated voltage for 5 seconds IEC60115-1-4.13 (2 % + 0.1 ) Resistance to Solder Heat 270 5 for 10 1 seconds IEC60115-1-4.18 (0.5 % + 0.05 ) (1 % + 0.05 ) Resistance to Dry Heat 125 5 for 96 4 hours IEC60115-1-4.23.2 (1 % + 0.05 ) (2 % + 0.1 ) Rated voltage for 1000 hours, 70 , Load Life IEC60115-1-4.25.1 (3 % + 0.1 ) 1.5 hours ON, 0.5 hours OFF Rated voltage for 1000 hours, 40 2 , Load Life with Humidity IEC60115-1-4.24 (3 % + 0.1 ) 90~95 % RH, 1.5 hours ON, 0.5 hours OFF Solderability 245 5 , 2 0.5 seconds IEC60115-1-4.17 95 % of area covered Bending 3 mm IEC60115-1-4.33 (0.5 % + 0.05 ) (1 % + 0.05 ) Dielectric Withstanding -- IEC60115-1-4.7 >100 V Voltage Insulation Resistance 100 V IEC60115-1-4.6 1 G *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. *RoHS COMPLIANT VERSIONS AVAILABLE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Rated Power (%) CR0402 - Chip Resistor Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1> Maximum of 20 seconds between 260 C peak +255 C and +260 C <1> 255 C 225 220 C 190 C 60 - 90 seconds 175 150 C Ramp Down 6 C/second 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 C/second maximum 25 050 100 150 200 250 300 Time (seconds) Packaging Dimensions (Conforms to EIA RS-481A) 1.0 0.2 (.040 .020) 1.5 + 0.1/-0 DIA. (0.059 + 0.004/-0) 0.45 0.1 (0.018 0.004) 4.0 0.1 1.75 0.1 (0.157 0.004) 2.0 (0.069 0.004) (.080) 13.0 0.5 0.65 0.1 (.512 .020) 3.5 0.05 (0.026 0.004) (0.138 0.002) 80.0 1.0 (3.150 .040) 1.15 0.1 8.0 0.2 (0.045 0.004) (0.315 0.008) 20.5 Paper 2.0 0.1 (.807) (Punched) 178.0 2.0 (0.079 0.004) Direction of Feeding (7.008 .080) MM DIMENSIONS: (INCHES) 10.0 1.5 (.394 .059) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Temperature (C)

Tariff Desc

8533.10.00 17 No Fixed carbon resistors, composition or film types Free

ELECTRICAL RESISTORS (INCLUDING RHEOSTATS AND POTENTIOMETERS)
BOURNS
Bourns Inc.
BOURNS JW MILLER
BR4
J.W. Miller
JW Miller