H-83P Bourns

Factory Installed Panel Mount Models RT12/RJ12, 3057/3059 Models 3005/3006/3009 TRIMPOT POTENTIOMETER HEX NUT AND PANEL MOUNTING OPTIONS AND 6.35 LOCKWASHER 10-32 UNF-2A THD. (.25) HARDWARE 20.32 10.31 (.80) MAX. (.406) Many Trimpot Potentiometers are available for panel mount application. This product option provides for 2.54 (.100) maximum design flexibility. 7.95 33.35 (.313) To order Trimpot Potentiometers with (1.31) panel mount hardware attached by the 6.35 ADJ. SLOT factory, simply add an M or Z (.25) 2.54 LONG (.100 ) suffix to the Bourns part number per .508 WIDE Table I. (.020) .762 DEEP BUSHING (.030) 10-32 Example: NF-2 THD 3006P-1-100Z To order military Trimpot Potentiom- eters with panel mount hardware attached by the factory, order the military part number and add with panel 3.81 mount attached. 6.76 .38 1.52 TO 3.30 (.150) (.266 .015) (.06 TO .13) Example: RT12C2PRC, with panel mount attached. ADJ. SLOT 2.54 LONG 7.92 To order panel mounting accessories for (.100) .635 (.312) customer installation, simply use the part WIDE (.020) 3.30 .762 number per Table II. PANEL MAX. DEEP (.030) (0.13) 5.94 Example: (.234) H83P NOTE: For complete product specifica - Notes: NOTES: tions, see data sheet for the trimmer 1. Provided with lockwasher and 1. Provided with lockwasher and mounting nut. model. mounting nut. 2. Recommend panel hole size .200 dia. ( 7 drill). Notes: Torque - Apply maximum 8 in. lbs. 2. Recommended panel holes. 7 drill 1. Provided with lockwasher and NOTES: on mounting nut when mounted on 5.08 1. Provided with lockwasher and mounting nut. mounting nut. panel. 2. Recommend panel holes. 10 drill (.194). (.200) 2. Recommended panel holes. 10 drill 4.93 (.194) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Factory Installed Panel Mount 3292 RT22/RTR22/RJ22 3250/3252 RT24/RTR24/3290 X, L and W Styles H and W Styles - 3290 X & W Styles-RT24/RTR24 6.10 7.62 6.10 (.240) (.300) (.240) 3.05 4.06 3.05 (.120) (.160) (.120) ADJ. SLOT ADJ. SLOT ADJ. SLOT .243 .243 .243 BUSHING LONG LONG BUSHING BUSHING LONG (.010) (.010) (.010) 10-32 UNF-2A 10-32 UNF-2A 10-32 UNF-2A .064 .064 .064 THD. THD. WIDE THD. WIDE WIDE (.003) (.003) (.003) OPT. BEND .064 .064 OPT. BEND .064 DEEP DEEP DEEP DOWN ANTI- OPT. BEND (.003) (.003) DOWN ANTI- (.003) ROTATION TAB DOWN ANTI- ROTATION TAB ROTATION TAB 6.35 6.35 6.35 (.250) (.250) (.250) 10.92 13.97 11.43 (.430) (.550) (.450) 11.68 11.68 (.460) (.460) 14.99 (.590) 8.26 .038 8.26 .038 (.325 .020) (.325 .020) PANEL PANEL 11.43 PANEL 3.3 3.3 (.450) 3.3 (.130) (.130) (.130) MAX MAX MAX PANEL LAYOUT PANEL LAYOUT PANEL LAYOUT 5.08 5.08 = 7 DRILL = 7 DRILL 5.08 7.37 7.37 (.200) (.200) = 7 DRILL (.290) (.200) (.290) 10.16 (.400) 1.32 OPTIONAL FOR 1.32 OPTIONAL FOR (.052) ANTI-ROTATION LUG (.052) ANTI-ROTATION LUG 1.32 OPTIONAL FOR (.052) ANTI-ROTATION LUG Notes: NOTES: NOTES: 1. Provided with lockwasher and mounting nut. 1. Provided with lockwasher and mounting nut. 1. Provided with lockwasher and NOTES:Notes: mounting nut. 1. Provided with lockwasher and mounting nut. Notes: 1. Provided with lockwasher and 1. Provided with lockwasher and mounting nut. mounting nut. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.