PM5022-150M-RC Bourns

Features Applications Formerly model Input/output of DC/DC converters Available in E6 series Power supplies for: Low prole of only 6.6 mm Portable communication equipment Inductance as low as 1 H Camcorders RoHS compliant* LCD TVs PM5022 Series - SMD Power Inductor Test Voltage ....................................0.1 V Inductance .... 250 C 10 sec max. 100 kHz Test SRF I rms I sat (In compliance with JEDEC, Q Frequency Typ. RDC Max. Typ. Bourns Part No. (H) Tol. % Ref. (MHz) (MHz) (m) (A) (A) J-STD-020C, Table 4-2) Operating Temperature PM5022-1R0M-RC 1.0 20 21 7.96 100.0 4.0 10.0 30.00 ................................-40 C to +125 C PM5022-2R2M-RC 2.2 20 22 7.96 55.0 6.8 9.00 22.00 (Temperature rise included) PM5022-3R3M-RC 3.3 20 22 7.96 40.0 9.8 7.60 17.00 Storage Temperature PM5022-5R6M-RC 5.6 20 23 7.96 30.0 15.0 6.40 12.80 ................................-40 C to +125 C PM5022-8R2M-RC 8.2 20 22 7.96 27.0 20.0 7.00 9.40 Resistance to Soldering Heat PM5022-100M-RC 10 20 22 2.52 25.0 25.0 5.30 10.00 .......................... 250 C, 10 sec. max. PM5022-150M-RC 15 20 20 2.52 17.0 35.0 4.30 8.00 Moisture Sensitivity Level .....................2 PM5022-220M-RC 22 20 22 2.52 13.0 45.0 3.60 6.70 ................. N/A PM5022-330M-RC 33 20 24 2.52 11.0 68.0 3.00 5.40 PM5022-470M-RC 47 20 22 2.52 9.0 95.0 2.50 4.60 Materials PM5022-680M-RC 68 20 22 2.52 8.0 130.0 2.10 3.80 Core ....................................... Ferrite DR PM5022-101<1>-RC 100 10 25 0.796 7.0 190.0 1.70 3.20 Wire ............................Enameled copper PM5022-151<1>-RC 150 10 23 0.796 5.0 270.0 1.40 2.60 Base .....................................LCP E4008 PM5022-221<1>-RC 220 10 20 0.796 4.5 420.0 1.10 2.20 Terminal ........................................ Cu/Sn PM5022-331<1>-RC 330 10 18 0.796 3.5 580.0 1.00 1.80 Rated Current PM5022-471<1>-RC 470 10 15 0.796 3.0 820.0 0.80 1.50 ...................Ind. drop 10 % typ. at Isat PM5022-681<1>-RC 680 10 12 0.796 2.5 1200.0 0.70 1.20 Temp. Rise.......40 C max. at rated Irms PM5022-102<1>-RC 1000 10 10 0.252 2.0 1800.0 0.50 1.00 Packaging .................... 250 pcs. per reel <1> Enter tolerance code: K = 10 %, M = 20 %. Product Dimensions Electrical Schematic Recommended Layout 2.9 12.7 REF. REF. (.114) (.500) 14.0 0.3 (.551 .012) 3.0 REF. (.118) 18.3 0.3 6.6 0.3 (.720 .012) (.260 .012) MM DIMENSIONS: (INCHES) 13.0 0.3 (.512 .012) 2.5 0.2 (.098 .008) 2.6 0.2 (.102 .008) = START OF WINDING *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specications are subject to change without notice. Users should verify actual device performance in their specic WARNING Cancer and Reproductive Harm applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the www.P65Warnings.ca.gov last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT 101101 101 101 101 PM5022 Series - SMD Power Inductor 300 <1> Max. of 10 seconds at 250 C <2> Max. of 30 seconds > 220 C 250 C 250 <1> <2> 200 150 120 - 150 seconds 100 Ramp-down 5 C/second maximum 50 Ramp-up 4 /second maximum 0 0 50 100 150 200 250 300 Time (seconds) 2.0 0.5 330 (.079 .020) 38.4 (12.99) (1.512) DIA. THICKNESS 0.10 (.004) 13.0 0.5 21.0 0.8 MAX. (.512 .020) (.827 .031) DIA. EMBOSSED CAVITY 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 32.0 34 (1.260) (1.339) 4.0 (.157) END START 32.0 MM DIMENSIONS: (1.260) (INCHES) 20.0 (.787) NO COMPONENT NO COMPONENT 160 390 COMPONENTS (6.299) (15.354) USER DIRECTION OF FEED QTY: 250 PCS. PER REEL REV. 03/18 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Temperature (C)