Features Applications Available in E12 series Input/output of DC/DC converters Low prole - 4.7 mm unit height Power supplies for: High current Portable communication equipment RoHS compliant* Camcorders LCD TVs SRR0805 Series - Shielded Power Inductors Test Voltage .......................................1 V Inductance Test I rms I sat SRF RDC 1 KHz .. 250 C, 10 sec. max. Q Frequency Max. Max. Typ. Min. **K- (In compliance with JEDEC, Bourns Part No. H Tol. % Ref. (MHz) (MHz) () (A) (A) Factor J-STD-020C, Table 4-2) SRR0805-2R2M 2.2 20 18 7.96M 75.0 0.040 2.50 4.90 202 Operating Temperature SRR0805-3R9M 3.9 20 20 7.96M 50.0 0.055 2.10 3.70 159 ................................-40 C to +125 C SRR0805-5R6M 5.6 20 20 7.96M 40.0 0.065 1.95 3.20 132 (Temperature rise included) SRR0805-8R2M 8.2 20 19 7.96M 32.0 0.080 1.75 2.50 104 Storage Temperature .. -40 C to +125 C SRR0805-100M 10 20 40 2.52M 28.0 0.100 1.50 2.20 92 Resistance to Soldering Heat SRR0805-120M 12 20 40 2.52M 24.0 0.120 1.40 2.10 87 .......................... 260 C, 10 sec. max. SRR0805-150M 15 20 40 2.52M 22.0 0.140 1.30 1.80 78 Moisture Sensitivity Level .....................1 SRR0805-180Y 18 15 40 2.52M 19.0 0.160 1.20 1.70 70 ................. N/A SRR0805-220Y 22 15 38 2.52M 19.0 0.180 1.10 1.50 62 SRR0805-270Y 27 15 35 2.52M 15.5 0.200 1.00 1.40 57 Materials SRR0805-330Y 33 15 40 2.52M 13.5 0.240 0.92 1.20 51 SRR0805-390Y 39 15 35 2.52M 12.0 0.260 0.84 1.10 48 Core ............................... Ferrite DR & RI SRR0805-470Y 47 15 32 2.52M 10.5 0.280 0.75 1.00 43 Wire ............................Enameled copper SRR0805-560K 56 10 30 2.52M 9.5 0.380 0.68 0.95 40 Base .....................................LCP E4008 SRR0805-680K 68 10 28 2.52M 9.0 0.440 0.60 0.90 36 Terminal ....................................Cu/Ni/Sn SRR0805-820K 82 10 28 2.52M 8.5 0.550 0.54 0.74 33 Rated Current SRR0805-101K 100 10 45 0.796M 7.5 0.600 0.50 0.70 30 ...............Ind. drop of 10 % typ. at Isat SRR0805-121K 120 10 42 0.796M 7.0 0.750 0.45 0.66 27 Temperature Rise SRR0805-151K 150 10 39 0.796M 6.5 0.90 0.40 0.64 24 .....................40 C max. at rated Irms SRR0805-181K 180 10 41 0.796M 4.8 1.05 0.35 0.62 22 Packaging .................. 1000 pcs. per reel SRR0805-221K 220 10 38 0.796M 4.5 1.18 0.30 0.55 20 SRR0805-271K 270 10 37 0.796M 4.2 1.40 0.27 0.45 18 Product Dimensions SRR0805-331K 330 10 36 0.796M 3.8 1.80 0.24 0.38 17 SRR0805-471K 470 10 34 0.796M 3.5 2.25 0.20 0.35 14 8.0 0.2 SRR0805-561K 560 10 32 0.796M 3.0 3.00 0.18 0.34 12 (.315 .008) SRR0805-681K 680 10 32 0.796M 2.8 3.40 0.17 0.32 11 8.0 0.2 SRR0805-821K 820 10 35 0.796M 2.5 4.00 0.16 0.29 10 (.315 .008) SRR0805-102K 1000 10 35 0.252M 2.2 5.00 0.15 0.24 9 I (peak-to-peak ripple current, A), 4.7 10.5 0.3 MAX. (.185) determine core loss from Core Loss vs. Flux Density plot. (.413 .012) 4.7 10.5 0.3 MAX. (.185) (.413 .012) Core Loss vs. Flux Density 1000 6.0 (.236) 6.0 TYP. 2.1 TYP. 100 (.082) (.236) 1 MHz 2.1 TYP. 800 KHz TYP. (.082) 500 KHz 10 400 KHz 300 KHz 2.0 200 KHz TYP. (.079) 100 KHz 1 2.0 TYP. (.079) 0.10 Recommended Layout 2.2 5.7 (.086) (.224) 0.01 2.2 5.7 10 100 1000 (.086) (.224) Flux Density Bp-p (gauss) 2.5 (.099) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov 2.5 (.099) MM * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. DIMENSIONS: Specications are subject to change without notice. Users should verify actual device performance in their specic (INCHES) applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Core Loss (mW) 101 101 SRR0805 Series - Shielded Power Inductors Soldering Profile Schematic 275 <1> Max. of 10 seconds at 250 C <1> 250 C 225 217 C 60-150 190 C seconds Ramp down 6 /second maximum 175 125 120 - 150 seconds 10 seconds min. 75 Ramp up 3 /second maximum 0 0 50 100 150 200 250 300 Time (seconds) 330 2.0 0.5 22.4 DIA. (12.99) (.079 .020) (.882) 13.0 0.5 21 .8 (.512 .020) (.827 .031) DIA. 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) 18 (.709) 4 (.157) END START 16 MM (.630) DIMENSIONS: (INCHES) 12 4.8 (.472) (.189) NO COMPONENT COMPONENTS NO COMPONENT 200 11200 400 (7.874) (440.945) (15.748) USER DIRECTION OF FEED QTY: 1000 PCS. PER REEL REV. 03/18 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Temperature (C)