CleOIO-Shield Module Datasheet Version 1.1 Document Reference No.: BRT 000080 Clearance No.: BRT 066 Bridgetek Pte Ltd CleOIO-Shield Module Datasheet 1.1 Features 1 Introduction Arduino Uno compatible The CleOIO-Shield is an input/output expansion shield for CleO series and belongs to CleO CleO35, CleO50, NerO compatible accessories. It is compatible with CleO35, CleO50, With RTC module including external battery NerO, providing easy and extended I/O for Analog, 2 switch over function Digital, I C, SPI, UART interface. I/O features can be connected through Arduino Uno interface, With FM radio module including CleO Speaker MikroBus header, and Grove-Universal 4pin output and headphone Audio Jack output connector. With Voltmeter module up to 20V measurement The CleOIO-Shield is supplied with 5 daughter boards, One 4pin to 2pinx2 speaker cable. With 5 daughter boards as bundle: rotary potentiometers module, temperature & humidity sensor module, light sensor (LDR) module, microphone (MIC) module Contains 3.3V & 5.0V jumper selection Hardware reset button provided DC power input jack for 7V-20VDC 1A power adapter, 9VDC or 12VDC recommended Support Analog & Digital I/O 2 Support I C, SPI, UART interface Support MikroBUS interface* CE and FCC certified** *MikroBus interface is created by MikroElektronika as an open standard anyone can implement in their design. Please visit MikroE for more details **FM function not tested under EN55020 Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 178 Paya Lebar Road, 07-03, Singapore 409030. Singapore Registered Company Number: 201542387H Copyright Bridgetek Pte Ltd 1 CleOIO-Shield Module Datasheet Version 1.1 Document Reference No.: BRT 000080 Clearance No.: BRT 066 2 Ordering Information Part No. Description CleOIO-Shield1 module, with 5 daughter board modules, one 4pin to 2pinx2 CleOIO-Shield1 speaker cable. 3 Program Support Demo applications are provided for CleO modules by Bridgetek. Visit