Data Sheet ACNT-H313 2.5A Output Current IGBT Gate Drive Optocoupler in 15-mm Stretched SO8 Package Description Features The Broadcom ACNT-H313 contains an LED, which is 2.5A maximum peak output current optically coupled to an integrated circuit with a power output 2.0A minimum peak output current stage. This optocoupler is ideally suited for driving power 500-ns maximum propagation delay IGBTs and MOSFETs used in motor control inverter 350-ns maximum propagation delay difference applications. The high operating voltage range of the output 40-kV/s minimum Common Mode Rejection (CMR) at stage provides the drive voltages required by V = 2000V CM gate-controlled devices. The voltage and high peak output I = 5.0-mA maximum supply current CC current supplied by this optocoupler can be used to IGBT Under Voltage Lock-Out protection (UVLO) with directly. For IGBTs with higher ratings, this optocoupler can hysteresis be used to drive a discrete power stage, which drives the Wide operating V range: 15V to 30V CC IGBT gate. The ACNT-H313 has the highest insulation Industrial temperature range: 40C to 105C voltage of V = 2262 V in the IEC/EN/DIN EN IORM PEAK Safety approvals 60747-5-5. UL Recognized 7500 V for 1 min RMS CSA IEC/EN/DIN EN 60747-5-5 V = 2262 V IORM PEAK Applications High power system 690 V drives AC IGBT/MOSFET gate drive AC and brushless DC motor drives Renewable energy inverters Industrial inverters Switching power supplies CAUTION Take normal static precautions in handling and assembly of this component to prevent damage and/or degradation that may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments. The component is also not AEC-Q100 qualified and not recommended for automotive applications. Broadcom AV02-4249EN September 4, 2020ACNT-H313 Data Sheet 2.5A Output Current IGBT Gate Drive Optocoupler in 15-mm Stretched SO8 Package Functional Diagram Truth Table V V V V 1 V NC 8 CC EE CC EE CC POSITIVE NEGATIVE 2 V 7 OUT GOING (i.e., GOING (i.e., ANODE V LED TURN-ON) TURN-OFF) O NC CATHODE 3 6 OFF 0V to 30V 0V to 30V LOW V NC 4 ON 0V to 11V 0V to 9.5V LOW 5 EE ON 11V to 13.5V 9.5V to 12V TRANSITION ON 13.5V to 30V 12V to 30V HIGH NOTE: NC denotes Not Connected, and a 0.1-F bypass capacity must be connected between pins V CC and V . EE Ordering Information ACNT-H313 is UL Recognized with 7500 V for 1 minute per UL1577. RMS Option IEC/EN/DIN EN 60747-5-5 RoHS V = 2262 V Part Number Compliant Package Surface Mount Tape and Reel Quantity IORM PEAK ACNT-H313 -000E 15 mm Stretched X X 80 per tube SO-8 -500E X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACNT-H313-500E to order a product in Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval and RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information. Broadcom AV02-4249EN 2