ACPL-772L and ACPL-072L 3.3V/5V High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Dual voltage operation (3.3V and 5V) Available in either an 8-pin DIP or SO-8 style respectively, the ACPL-772L or ACPL-072L optocouplers utilize the Allow level shifting functionality latest CMOS IC technology to achieve outstanding speed Support high Speed datarate of 25 MBd performance of minimum 25MBd data rate and 6ns Wide Temperature operation maximum pulse width distortion. CMOS output and buffer input Basic building blocks of this family of products are a Compatible with CMOS and TTL logic level CMOS LED driver IC, a high speed LED and a CMOS Lower power consumption with 3.3V supply detector IC. A CMOS logic input signal controls the LED Good AC performance with lower pulse width driver IC, which supplies current to the LED. The detector distortion IC incorporates an integrated photodiode, a high speed Lead-free option available transimpedance amplifier, and a voltage comparator with an output driver. Specifications Functional Diagram 3.3V and 5V CMOS Compatibility High Speed: DC to 25 MBd **V 1 8 V ** 6ns max. Pulse Width Distortion DD1 DD2 40 ns max. Prop. Delay V 2 7 NC* 20 ns max. Prop. Delay Skew I 10 kV/ms min. Common Mode Rejection I O NC* 3 6 V -40 C to 105 C Temperature Range O LED1 Safety and Regulatory Approvals: UL Recognised 4 5 GND GND 1 2 SHIELD - 5000V for 1 min. per UL1577 for ACPL-772L rms for option 020 * Pin 3 is the anode of the internal LED and must be left unconnected - 3750V for 1 min. per UL1577 for ACPL-072L rms for guaranteed datasheet performance. Pin 7 is not connected CSA Component Acceptance Notice 5 internally. ** A 0.1uF bypass capacitor must be connected between pins 1 and 4, IEC/EN/DIN EN 60747-5-2 and 5 and 8. V = 630 V for ACPL-772L Option 060 IORM peak V = 560 V for ACPL-072L Option 060 IORM peak TRUTH TABLE (POSITIVE LOGIC) Applications V , INPUT LED1 V , OUTPUT I O Digital Fieldbus Isolation: DeviceNet, Profibus, SDS H OFF H Multiplexed Data Transmission L ON L General Instrument and Data Acquisition Computer Peripheral interface Microprocessor System Interface CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD.Device Selection Guide 8-Pin DIP Small Outline (300 Mil) SO-8 ACPL-772L ACPL-072L Ordering Information ACPL-072L and ACPL-772L are UL Recognized with 3750 Vrms for 1 minute per UL1577. UL 5000 Option Vrms/ 1 IEC/EN/DIN Part RoHS Non RoHS Surface Gull Tape Minute EN 60747- number Compliant Compliant Package Mount Wing & Reel rating 5-2 Quantity -000E - 50 per tube -300E - X X 50 per tube -500E - X X X 1000 per reel -020E - X 50 per tube 300mil ACPL-772L -320E - X X X 50 per tube DIP-8 -520E - X X X X 1000 per reel -060E - X 50 per tube -360E - X X X 50 per tube -560E - X X X X 1000 per reel -000E No option X 100 per tube -500E -500 X X 1500 per reel ACPL-072L SO-8 -060E -060 X X 100 per tube -560E -560 X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-772L-560E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant. Example 2: ACPL-072L to order product of Small Outline SO-8 package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. 2