ACPL-32JT Automotive 2.5 Amp Gate Drive Optocoupler with Integrated Flyback Controller for Isolated DC-DC Converter, Integrated IGBT Desat Overcurrent Sensing, Miller Current Clamping and UVLO Feedback Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Avago s Automotive 2.5 Amp Gate Drive Optocoupler Qualified to AEC-Q100 Grade 1 Test Guidelines features integrated flyback controller for isolated DC-DC Automotive temperature range: -40 C to +125 C converter, IGBT desaturation sensing and fault feedback, Integrated flyback controller for isolated DC-DC Under-Voltage LockOut (UVLO) with soft-shutdown and converter fault feedback and active Miller current clamping. The Regulated Output Voltage: 20 V fast propagation delay with excellent timing skew per- Peak output current: 2.5 A max. formance enables excellent timing control and efficiency. This full feature optocoupler comes in a compact, surface- Miller Clamp Sinking Current: 1.7 A max. mountable SO-16 package for space-savings, is suitable Wide Input Voltage Range: 8 V to 18 V for traction power train inverter, power converter, battery Common-Mode Rejection (CMR): > 30 kV/ms at V = CM charger, air-conditioner and oil pump motor drives in HEV 1500 V and EV applications. Propagation delay: 250 ns max. 2 Avago R Coupler isolation products provide reinforced Integrated fail-safe IGBT protection insulation and reliability that delivers safe signal isolation Desat sensing, Soft IGBT turn-off and Fault critical in automotive and high temperature industrial ap- Feedback plications. Under Voltage Lock-Out (UVLO) protection with Feedback Functional Diagram High Noise Immunity SW VEE2 VCC2 Miller Current Clamping OSC Direct LED input with low input impedance and low Logic Control noise sensitivity S R LED2+ Negative Gate Bias VCC1 UVLO SO-16 package with 8 mm clearance and creepage COMP Regulatory approvals: /UVLO VE Input Driver UL 1577, CSA DESAT /FAULT Over IEC/EN/DIN EN 60747-5-5 Output Driver Current VEE1 Applications VO Automotive Isolated IGBT/MOSFET Inverter gate drive AN SSD/ SSD Control CLAMP CA Automotive DC-DC Converter Miller Control VEE2 AC and brushless DC motor drives Figure 1. ACPL-32JT Functional Diagram Hybrid and Plug-in hybrid powertrain inverter Uninterruptible Power Supplies (UPS) CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD. 9(4) Ordering Information Option IEC/EN/DIN EN Part Number (RoHS Compliant) Package Surface Mount Tape & Reel 60747-5-5 Quantity ACPL-32JT -000E SO-16 X X 45 per tube ACPL-32JT -500E X X X 850 per reel To order, choose a part number from the Part Number column and combine with the desired option from the Option column to form an order entry. Example: ACPL-32JT-500E to order product of SO-16 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval that is RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawing (16-Lead Surface Mount) 0.457 typ. 1.270 BSC (0.050) (0.018) RECOMMENDED LAND PATTERN PART NUMBER DATE CODE +0.254 RoHS A 32JT 7.493 11.634 0.127 COMPLIANCE (0.458) YYWW +0.010) INDICATOR (0.295 0.005) EE 2.160 (0.085) Extended Datecode for 0.635 +0.254 lot tracking 10.363 0.127 (0.025) 1.270 +0.010) (0.408 (0.050) 0.005) 8.763 0.254 (0.345 0.010) 3.505 0.127 (0.138 0.005) 0.203 0.102 (0.008 0.004) (0 - 8) 0.254 typ. STANDOFF Dimensions in millimeters (inches) (0.010) 0.635 min. (0.025) Note: Lead coplanarity = 0.10 mm (0.004 inches) 10.363 0.254 Floating lead protrusion = 0.25 mm (0.010 inches) Max. (0.408 0.010) Mold Flash on each side = 0.127 mm (0.005 inches) Max. Recommended Lead-free IR Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-halide flux should be used. 2 9(4)