Data Sheet ACPL-352J 5.0 Amp Output Current IGBT and SiC/GaN MOSFET Gate Drive Optocoupler with Integrated Overcurrent Sensing, FAULT, GATE, and UVLO Status Feedback Description Features The Broadcom ACPL-352J is a 5.0A intelligent gate drive 5.0A maximum peak output current optocoupler. The high peak output current and wide 4.5A minimum peak output current operating voltage range make it ideal for driving IGBT or 150-ns maximum propagation delay SiC/GaN MOSFET directly in motor control and inverter Dual output drive to control turning on and off time applications. Overcurrent detection with configurable Soft shutdown Functional safety reporting: The device features fast propagation delay with excellent Overcurrent FAULT feedback timing skew performance. It provides IGBT/MOSFET with IGBT/MOSFET GATE status feedback overcurrent protection and functional safety reporting. This UVLO status feedback full-featured and easy-to-implement gate drive optocoupler comes in a compact, surface-mountable SO-16 package. It Under Voltage Lock-Out (UVLO) with hysteresis provides reinforced insulation certified for safety regulatory 100-kV/s Minimum Common Mode Rejection (CMR) IEC/EN/DIN, UL and CSA. at V = 1500V CM 15V to 30V wide operating V range DD2 CAUTION It is advised that normal static precautions be 40C to 105C industrial temperature range taken in handling and assembly of this 8.3-mm creepage and clearance component to prevent damage and/or Safety approval: degradation which may be induced by ESD. UL Recognized 5000 V for 1min. RMS The components featured in this data sheet are CSA not to be used in military or aerospace IEC/EN/DIN EN 60747-5-5 V = 1414 V applications or environments. IORM PEAK Applications IGBT and SiC/GaN MOSFET gate drive Industrial drives and inverters Renewable energy inverters Switching power supplies Broadcom pub-005817 May 15, 20205.0 Amp Output Current IGBT and SiC/GaN MOSFET Gate Drive Optocoupler with Integrated ACPL-352J Data Sheet Overcurrent Sensing, FAULT, GATE, and UVLO Status Feedback Functional Diagram 12 V DD2 UVLO 7 D ANODE R V /CLAMP OUTP 11 Driv e Logic I 6, 8 Clamp & Ov erlap V CATHODE Logic Protection LED1 E 9 R V S Gate Monitor SHIELD V OUTN 10 5 V 16 DD1 V SS2 2 LED2 UVLO 14 OC 3 FAULT 4 DESAT GFAULT 13 SS 1 V SS1 SHIELD Broadcom pub-005817 2 Control Logic