ACPL-4800-300E Broadcom

ACPL-4800 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Performance Specified for Fast IPM Applications over The ACPL-4800 fast speed optocoupler contains a GaAsP Industrial Temperature Range: -40C to 100C LED and photo detector with built-in Schmitt trigger to provide logic-compatible waveforms, eliminating the need Wide Operating V Range: 4.5 to 20 Volts CC for additional wave shaping. The totem pole output elimi- Typical Propagation Delays 150 ns nates the need for a pull up resistor and allows for direct Maximum Pulse Width Distortion drive Intelligent Power Module or gate drive. PWD = 250 ns Propagation Delay Difference Functional Diagram Min. 100 ns, Max. 250 ns 30 kV/s Minimum Common Mode Transient Immunity 8 NC 1 V CC at V = 1000 V CM ANODE 2 7 NC Hysteresis Totem Pole Output (No Pull-up Resistor Required) 6 V CATHODE 3 O Safety Approval: 4 5 NC GND UL 1577, 3750 V / 1 minute rms SHIELD CSA File CA88324, Notice 5 IEC/EN/DIN EN 60747-5-2, V = 630 V IORM peak TRUTH TABLE (POSITIVE LOGIC) Applications LED V O ON HIGH IPM Interface Isolation OFF LOW Isolated IGBT/MOSFET Gate Drive Note: The connection of a 0.1 F AC and Brushless DC Servo Motor Drives bypass capacitor between pins 5 Low Power Inverters & 8 is recommended. General Digital Isolation Schematic I CC V CC 8 I I O F 2 V + O 6 V F - 3 GND SHIELD 5 CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and /or degradation which may be induced by ESD.Ordering Information ACPL-4800 is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice 5, File CA 88324. Option RoHS IEC/EN/DIN EN Part number Compliant Package Surface Mount Gull Wing Tape& Reel 60747-5-2 Quantity -000E 50 per tube -300E X X 50 per tube -500E X X X 1000 per reel ACPL-4800 300mil DIP-8 -060E X 50 per tube -360E X X X 50 per tube -560E X X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-4800-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant. Example 2: ACPL-4800-000E to order product of 300mil DIP package in tube packaging and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings DIP-8 Package 7.62 0.25 9.65 0.25 (0.300 0.010) (0.380 0.010) 8 7 6 5 6.35 0.25 TYPE NUMBER OPTION CODE* (0.250 0.010) DATE CODE A XXXXZ YYWW UL 1 2 3 4 RECOGNITION 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) 3.56 0.13 (0.010 4.70 (0.185) MAX. - 0.002) (0.140 0.005) 0.51 (0.020) MIN. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). 1.080 0.320 0.65 (0.025) MAX. (0.043 0.013) * MARKING CODE LETTER FOR OPTION NUMBERS 2.54 0.25 = OPTION 060 (0.100 0.010) OPTION NUMBERS 300 AND 500 NOT MARKED. 2 UR