ACPL-K33T-500E Broadcom

ACPL-K33T Automotive 2.5 A Peak High Output Current SiC MOSFET and IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO-8 Data Sheet Description Features Avago Technologies 2.5 Amp Automotive R2Coupler Gate Qualified to AEC-Q100 Grade 1 Test Guidelines Drive Optocoupler contains an AlGaAs LED, which is optically Automotive temperature range: -40 C to +125 C coupled to an integrated circuit with a power output stage. The Peak output current: 2.0 A min. ACPL-K33T features fast propagation delay and tight timing Rail-to-rail output voltage skew, is ideally designed for driving SiC MOSFET and IGBTs Propagation delay: 120 ns max. used in AC-DC and DC-DC converters. The high operating Dead time distortion: +50 ns/40 ns voltage range of the output stage provides the drive voltages required by gate-controlled devices. The voltage and high LED input threshold current hysteresis peak output current supplied by this optocoupler make it Common Mode Rejection (CMR): 50 kV/s min. at VCM = ideally suited for direct driving SiC MOSFET and IGBTs at high 1500 V frequency for high efficiency conversion. Low supply current allow bootstrap half-bridge topology: ICC = 4.2 mA max. Avago R2Coupler isolation products provide reinforced insulation and reliability that delivers safe signal isolation Under Voltage Lock-Out (UVLO) protection with hysteresis critical in automotive and high-temperature industrial for SiC MOSFET and IGBT applications. Wide operating VCC range: 15 V to 30 V Safety Approvals: CAUTION It is advised that normal static precautions be UL Recognized 5000 VRMS for 1 min taken in handling and assembly of this CSA component to prevent damage and/or IEC/EN/DIN EN 60747-5-5 VIORM = 1140 Vpeak degradation which may be induced by ESD. Applications Hybrid Power Train DC/DC Converter EV/PHEV Charger Automotive Isolated IGBT Gate Drive AC and Brushless DC Motor Drives Avago Technologies - 1 -ACPL-K33T Functional Diagram Data Sheet Functional Diagram Figure 1 ACPL-K33T Functional Diagram 1 8 V ANODE CC NC 2 7 V OUT 3 6 NC CATHODE NC 4 5 V EE SHIELD NOTE Minimum 1 F bypass capacitor must be connected between pins V and V . CC EE Truth Table V V V LED CC EE OUT OFF 0 30 V LOW ON < V LOW UVLO- ON > V HIGH UVLO+ Ordering Information Option (RoHS Surface Tape and UL 5000 Vrms/1 IEC/EN/DIN EN Part Number Package Quantity Compliant) Mount Reel Minute rating 60747-5-5 ACPL-K33T -000E Stretched SO-8 X X 80 per tube -060E X X X 80 per tube -500E X X X 1000 per reel -560E X X X X 1000 per reel To order, choose a part number from the Part Number column and combine it with the desired option from the Option column to form an order entry. Example 1: ACPL-K33T-560E to order product of SSO-8 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval and is RoHS compliant. Option data sheets are available. Contact your Avago sales representative or authorized distributor for information. Avago Technologies - 2 -