ACPL-M71U and ACPL-M72U Wide Operating Temperature, High Speed, Low Power 2 Digital Optocouplers with R Coupler Isolation Data Sheet Description Features The Avago ACPL-M71U and ACPL-M72U are high tem- 5 V CMOS compatible perature, digital CMOS optocouplers in SOIC-5 packages. Common-Mode Rejection 40kV/s V =1000V: CM These optocouplers use the latest CMOS IC technology Wide Industrial temperature range: 40C to 125C to achieve outstanding performance and very low power consumption. All devices operate over the 40C to 125 C Low propagation delay : temperature range. High Speed ACPL-M71U: 26ns I = 10 mA F (Typical) The ACPL-M71U uses a high speed LED, and the Low Power ACPL-M72U: 60ns I = 4 mA (Typical) ACPL-M72U uses a low current LED for lower power dis- F sipation. The high speed ACPL-M71U featuring a 35 ns Worldwide safety approval: maximum propagation delay (I =10 mA). The ACPL-M72U F UL 1577 recognized, 3750 Vrms / 1 min optocoupler features very low power. With a low 4 mA CSA approved LED drive current, ACPL-M72U typical propagation delay IEC/EN/DIN EN 60747-5-5 is 60 ns. Applications Each digital optocoupler has a CMOS detector IC, an in- tegrated photodiode, a high speed transimpedance Industrial CANBus communications interface amplifi er, and a voltage comparator with an output Industrial isolated high speed gate drivers for IGBTs driver. and Power MOSFETs 2 Avago R Coupler isolation products provide the rein- High temperature digital signal isolation forced insulation and reliability needed for critical in high Microcontroller interface temperature industrial applications Digital isolation for A/D and D/A conversion Functional Block Diagram ACPL-M71U/ACPL-M72U 6 Vdd 1 Anode 5 Truth Table V o LED Output (V ) O Cathode 3 OFF H Gnd 4 ON L Note: A 0.1 F bypass capacitor must be connected between pins 4 and 6. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information Option Part Number (RoHS) Compliant Package Surface Mount Tape & Reel Quantity ACPL-M71U -000E SO-5 X 100 per tube -500E X X 1500 per reel ACPL-M72U -000E SO-5 X 100 per tube -500E X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. For example, the part number ACPL-M71U-500E describes a device with a surface mount SOIC-5 package delivered in Tape and Reel with 1500 parts per reel and full RoHS compliance. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Dimensions ACPL-M71U / ACPL-M72U (JEDEC MO-155 Package) LAND PATTERN RECOMMENDATION 0.5 0.3 (0.02) (0.01) 1.3 (0.05) ROHS-COMPLIANCE INDICATOR PART NUMBER DATE CODE MXXX 7.0 0.2 4.4 0.1 (0.276 0.008) 4.4 8.27 (0.173 0.004) XXX (0.17) (0.325) 1.8 (0.072) 0.4 0.05 (0.016 0.002) 2.5 (0.10) 3.6 0.1* (0.142 0.004) 0.102 0.102 0.15 0.025 2.5 0.1 (0.004 0.004) (0.006 0.001) (0.098 0.004) 7 MAX. 1.27 0.71 BSC MIN (0.028) (0.050) MAX. LEAD COPLANARITY Dimensions in millimeters (inches). = 0.102 (0.004) Note: Foating Lead Protrusion is 0.15 mm (6 mils) max. * Maximum Mold flash on each side is 0.15 mm (0.006). 2