AFBR-4536EZ, -4536BZ, -4536DZ Plastic Optical Duplex Bulkhead Connector Suitable For Duplex Connector AFBR-452xZ Data Sheet Description Features Avago Technologies AFBR-4536xZ duplex bulkhead con- Thermocomp Plastic Material (UL File E121562) nectors are designed for use with Avago Technologies du- Available in two colors: black and blue plex connectors AFBR-452xZ. Its rugged design contains a Excellent Retention Force latching mechanism for an increased retention force. The simple snap-together concept saves the user labor and Symmetry in Non-latching Connector Gives Simplex/ tool cost. Duplex Functionality with the Same Part The connectors are made of a rugged, flame retardant Applications plastic which is suitable for industrial and other harsh en- Industrial Control and Voltage Isolation vironments. The AFBR-4536xZ duplex bulkhead connec- tors are for use with Plastic Optical Fiber (POF) only. Automotive Networks Proprietary System Interconnects The AFBR-4536EZ uses standard black port color, AFBR- 4536BZ has a blue colored port and AFBR-4536DZ has Gaming Equipment one black and one blue port. This product is lead free and Medical Equipment compliant with RoHS. Telecommunications Data Communications Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Notes Storage Temperature T -40 +85 C 1 ST Recommended Operating Temperature T -40 +85 C 1 OP Installation Temperature T 0 +70 C 1 INST Notes: 1. Storage and operating temperatures refer to the ranges over which the connectors can be used when not subjected to mechanical stress. Installation temperature refers to the ranges over which connectors may be installed onto the fiber and over which connectors can be connected and disconnected from the transceiver. 3.9 Mechanical and Optical Characteristics Parameter Symbol Min. Typ. Max. Unit Temp. C Notes Retention force, bulkhead to duplex connector F 15 35 N 25 1 RP latching button pressed Retention force, bulkhead to duplex connector F 45 N 25 1 RNP-25 latching button NOT pressed Retention force, bulkhead to duplex connector F 20 N -40 to 85 2 RNP latching button NOT pressed Insertion force, bulkhead to duplex connector FI 30 N 1 Insertion loss using AFBR-4526Z duplex connector P 1.5 2.5 dB -40 to 85 3 ATT Notes: 1. Typical data are at 25C. 2. Usually, the button of the latching mechanism shall be pressed when disconnecting the fiber. If the connector is pulled out of the bulkhead connector while the lever is not pressed, the latching mechanism will degrade significantly after the first cycle 3. Well polished POF surfaces, measured at beginning of life (0hrs) using original Avago 1m cable assembly. The typical value is valid for room temperature. Package Dimensions 16.2 11.5 Surface cutout 30 23 29.56 15.51 M3 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 2005-2015 Avago Technologies. All rights reserved. AV02-4967EN - July 1, 2015 3.2 4.42 11 5.5 10.16