HCPL-4534-300E Broadcom

HCPL-4534 and HCPL-0534 Dual Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features 15 kV/s minimum common mode transient These dual channel optocouplers contain a pair of light immunity at V = 1500 V CM emitting diodes and integrated photo-detectors with TTL compatible electrical insulation between input and output. Separate connection for the photodiode bias and output transis- Available in 8 pin DIP, SO-8, and 8 pin DIP gull wing tor collectors increase the speed up to a hundred times surface mount (option 300) packages that of a conventional phototransistor coupler by High density packaging reducing the base-collector capacitance. 3 MHz bandwidth These dual channel optocouplers are available in an 8 Open collector outputs Pin DIP and in an industry standard SO-8 package. The Guaranteed performance from 0C to 70C following is a cross reference table listing the 8 Pin DIP Safety approval part number and the electrically equivalent SO-8 part UL Recognized 3750 V rms for 1 minute (5000 V rms number. for 1 minute for Option 020) per UL1577 CSA Approved SO-8 IEC/EN/DIN EN 60747-5-2 8 Pin DIP Package V = 630 Vpeak for HCPL-4534 0ption 060 IORM HCPL-4534 HCPL-0534 V = 560 Vpeak for HCPL-0534 0ption 060 IORM Single channel version available (4502/3, 0452/3) Functional Diagram MIL-PRF-38534 hermetic version available (55XX/65XX/4N55) 8 ANODE 1 V 1 CC TRUTH TABLE Applications (POSITIVE LOGIC) CATHODE 2 7 V 1 O1 Line receivers high common mode transient LED V O ON LOW immunity (>1000 V/s) and low input-output 6 OFF HIGH CATHODE 3 V 2 O2 capacitance (0.6 pF) High speed logic ground isolation TTL/TTL, TTL/ ANODE 4 5 GND 2 LTTL, TTL/CMOS, TTL/LSTTL Replace pulse transformers save board space and weight A 0.1 F bypass capacitor between pins 5 and 8 is recommended. Analog signal ground isolation integrated photon detector provides improved linearity over HCPL-2530 Functional Diagram phototransistor type Polarity sensing Isolated analog amplifier dual channel packaging enhances thermal tracking CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.The SO-8 does not require through holes in a PCB. The HCPL-4534/0534 is an HCPL-2531/0531 with This package occupies approximately one-third the increased common mode transient immunity of 15,000 footprint area of the standard dual-in-line package. The V/s minimum at V = 1500 V guaranteed. CM lead profile is designed to be compatible with standard surface mount processes. The HCPL-4534/0534 is designed for high speed TTL/TTL applications. A standard 16 mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 k pull-up resistor. CTR of the HCPL- 4534/0534 is 19% minimum at I = 16 mA. F Selection Guide Widebody Minimum CMR 8-pin DIP (300 Mil) Small-Outline SO-8 (400 Mil) Hermetic Current Dual Single Dual Single Single Single and dV/dt V Transfer Channel Channel Channel Channel Channel Dual Channel CM (V/s) (V) Ratio (%) Package Package* Package Package* Package* Packages* 10 HCPL-4502 HCPL-0452 HCNW4502 15,000 1500 19 HCPL-4534 HCPL-4503 HCPL-0534 HCPL-0453 HCNW4503 1,000 10 9 HCPL-55XX HCPL-65XX 4N55 * Technical data for these products are on separate Avago publications. 2