HCPL-7710/0710 40 ns Propagation Delay, CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features Available in either an 8-pin DIP or SO-8 package style +5 V CMOS compatibility respectively, the HCPL-7710 or HCPL-0710 optocouplers 8 ns maximum pulse width distortion utilize the latest CMOS IC technology to achieve outstand- 20 ns maximum prop. delay skew ing performance with very low power consumption. The High speed: 12 Mbd HCPL-x710 require only two bypass capacitors for complete CMOS compatibility. 40 ns maximum prop. delay 10 kV/s minimum common mode rejection Basic building blocks of the HCPL-x710 are a CMOS LED -40C to 100C temperature range driver IC, a high speed LED and a CMOS detector IC. A Safety and regulatory approvals CMOS logic input signal controls the LED driver IC, which UL Recognized supplies current to the LED. The detector IC incorporates 3750 V for 1 min. per UL 1577 an integrated photodiode, a high-speed transimpedance rms 5000 V for 1 min. per UL 1577 (for HCPL-7710 amplifier, and a voltage comparator with an output driver. rms option 020) CSA Component Acceptance Notice 5 Functional Diagram IEC/EN/DIN EN 60747-5-5 V = 630 V for HCPL-7710 Option 060 TRUTH TABLEIORM peak (POSITIVE LOGIC) V = 567 V for HCPL-0710 Option 060 IORM peak **V 1 8 V ** DD1 DD2 V , INPUT LED1 V , OUTPUT I O H OFF H Applications 2 7 NC* V L ON L I Digital fieldbus isolation: DeviceNet, SDS, Profibus I O AC plasma display panel level shifting NC* 3 6 V O Multiplexed data transmission LED1 Computer peripheral interface 4 5 GND GND 1 2 SHIELD Microprocessor system interface * Pin 3 is the anode of the internal LED and must be left unconnected for guaranteed data sheet performance. Pin 7 is not connected internally. ** A 0.1 F bypass capacitor must be connected between pins 1 and 4, and 5 and 8. TRUTH TABLE (POSITIVE LOGIC) 1 8 **V V ** DD1 DD2 V , INPUT LED1 V , OUTPUT I O H OFF H 2 7 V NC* L ON L I I O CAUTION: It is advised that normal static precautions be taken in handling and assembly 3 6 NC* V O of this component to prevent damage and/or degradation which may be induced by ESD. LED1 4 5 GND GND 1 2 SHIELDSelection Guide 8-Pin DIP Small Outline (300 Mil) SO-8 HCPL-7710 HCPL-0710 Ordering Information HCPL-0710 and HCPL-7710 are UL Recognized with 3750 V for 1 minute per UL1577. rms Option UL 5000 V / rms Part RoHS Non RoHS Surface Gull Tape 1 Minute IEC/EN/DIN number Compliant Compliant Package Mount Wing & Reel rating EN 60747-5-5 Quantity -000E No option 50 per tube -300E 300 X X 50 per tube -500E 500 X X X 1000 per reel -020E -020 X 50 per tube 300mil HCPL-7710 -320E -320 X X X 50 per tube DIP-8 -520E -520 X X X X 1000 per reel -060E 060 X 50 per tube -360E 360 X X X 50 per tube -560E 560 X X X X 1000 per reel -000E No option X 100 per tube -500E 500 X X 1500 per reel HCPL-0710 SO-8 -060E 060 X X 100 per tube -560E 560 X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-7710-560E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/ DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: HCPL-0710 to order product of Small Outline SO-8 package in tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. 2