Data Sheet HCPL-M452/HCPL-M453 Small Outline, 5 Lead, High Speed Optocouplers Description Features These small outline high CMR, high speed, diode-transistor Surface mountable optocouplers are single channel devices in a five lead Very small, low profile JEDEC registered package miniature footprint. They are electrically equivalent to the outline following Broadcom optocouplers. Compatible with infrared vapor phase reflow and wave soldering processes The SO-5 JEDEC registered (MO-155) package outline Very high common mode transient immunity: does not requirethrough hole in a PCB. This package 1,5000 V/s at V = 1500V guaranteed (HCPL-M453) CM occupies approximately one-fourth the footprint area of the High speed: 1 Mb/s standard dual-inline package. The lead profile is designed to TTL compatible be compatible with standard surface mount processes. Open collector output Worldwide safety approval: These diode-transistor optocouplers use an insulating layer between the LED and an integrated photon detector to UL1577 recognized, 3750Vrms/1min provide electrical insulation between input and output. CSA approved Separate connections for the photo-diode bias and output Lead-free option transistor collector increase the speed up to a hundred Applications times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance. Line receivers: High common mode transient immunity (>1000 V/s) and low input-output capacitance (0.6 pF). The HCPL-M452 is designed for high speed TTL/TTL High speed logic ground isolation: TTL/TTL, TTL/LTTL, applications. A standard 16 mA TTL sink current through the TTL/CMOS, TTL/LSTTL input LED provides enough output current for 1 TTL load Replace slow phototransistor optocouplers and a 5.6 k pull-up resistor. CTR of the HCPL-M452 is Replace pulse transformers: save board space and 19% minimum at I = 16 mA. F weight Analog signal ground isolation: integrated photon The HCPL-M453 is an HCPL-M452 with increased common detector provides improved linearity over mode transient immunity of 15,000 V/s minimum at photo-transistor type V = 1500V guaranteed. CM CAUTION The small device geometries inherent to the design of this bipolar component increase the component s susceptibility to damage from electrostatic discharge (ESD). Take normal static precautions in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Broadcom AV02-1968EN April 12, 2019HCPL-M452/HCPL-M453 Data Sheet Small Outline, 5 Lead, High Speed Optocouplers Ordering Options SO-5 Package Standard DIP SO-8 Package HCPL-M452 HCPL-4502 HCPL-0452 HCPL-M453 HCPL-4503 HCPL-0453 NOTE: These devices equivalent to 6N135/6N136 devices but without the base lead. Ordering Information HCPL-M452 and HCPL-M453 are UL Recognized with 3750 Vrms for 1 minute per UL1577. Option non-RoHS Part Number RoHS Compliant Compliant Package Surface Mount Tape and Reel Quantity HCPL-M452 -000E No option SO-5 X 100 per tube HCPL-M453 -500E 500 X X 1500 per tube To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-M452-500E to order product of SO-5 surface mount package in tape and reel packaging and RoHS compliant. Example 2: HCPL-M452 to order product of SO-5 surface mount package in tube packaging and non-RoHS compliant. Option data sheets are available. Contact your Broadcom sales representative or authorized distributor for information NOTE: The notation XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. Broadcom AV02-1968EN 2