Data Sheet HR5P-N4CB-00000 5-mm Round Infrared LED Lamp Description Features The Broadcom HR5P-N4CB-00000 is a 5-mm round Untinted, non-diffused infrared LED lamp available in an industrial standard 5-mm Low power consumption through lamp, making it easy to use and assemble. This Easy assembly product is capable of withstanding a peak current of Applications 1000 mA, offering greater design flexibility to the user. It has a 940-nm peak wavelength and a viewing angle of Industrial sensing 30 degrees. The HR5P-N4CB-00000 is suitable for a variety Illumination for remote control of applications, including smart meters, remote controls, Illumination for printers and scanners and more. Figure 1: Package Drawing 0.38 NOTE: 1. All dimensions in millimeters (mm). 2. Tolerance is 0.25 mm unless otherwise specified. 3. Lead spacing is measured at where the leads emerge from the body. 4. Epoxy meniscus may extend up to maximum 1.00 mm down the leads. Broadcom HR5P-N4CB-00000-DS103 May 22, 2020HR5P-N4CB-00000 Data Sheet 5-mm Round Infrared LED Lamp Device Selection Guide (T = 25C, I = 100 mA) J F a, b, c d Radiant Intensity, I (mW/sr) Viewing Angle, 2 () e Part Number Die Type Min. Typ. Max. Typ. HR5P-N4CB-00000 AlGaAs 71.5 121.0 180.0 30 a. The radiant intensity is measured at the mechanical axis of the package with a single current pulse condition (t = 20 ms). p b. The optical axis is closely aligned with the mechanical axis of the package. c. Tolerance is 15%. d. is the off axis angle where the radiant intensity is half of the peak intensity. Absolute Maximum Ratings Parameters Rating Unit a 100 mA DC Forward Current b, c 1000 mA Peak Forward Current Power Dissipation 180 mW LED Junction Temperature 100 C Operating Temperature Range 40 to +85 C Storage Temperature Range 40 to +100 C a. Derate linearly as shown in Figure 4. b. Duty factor = 1%, t = 100 s. p c. Pin temperature, T = 25C. p Optical and Electrical Characteristics (T = 25C, I = 100 mA) J F Parameter Symbol Min. Typ. Max. Units Test Conditions a 59 mWI =100 mA, t = 20 ms Radiant Flux e F p Peak Wavelength 940 nm I =100 mA, t = 20 ms PEAK F p Temperature Coefficient of Brightness TC 0.31 %/C I = 100 mA Ie F Spectral Line Half-Width 41 nm I = 100 mA, t = 20 ms 1/2 F p b V 1.30 1.42 1.80 V I = 100 mA Forward Voltage F F Temperature Coefficient of V TC 1.0 mV/CI = 100 mA F VF F c V 5 V I = 10 A Reverse Voltage R R Rise Time t 20 ns I = 100 mA r F Fall Time t 55 ns I = 100 mA f F Thermal Resistance R 200 C/W LED junction to pin J-P a. The radiant flux, is the total flux output as measured with an integrating sphere at a single current pulse condition (t = 20 ms). e p b. Forward voltage tolerance is 0.1V. c. Indicates the product final test condition. Long term reverse bias is not recommended. Broadcom HR5P-N4CB-00000-DS103 2