SB4 - Snappable PC BreadBoard Scored PC BreadBoard can be snapped into four smaller Solderable Boards Features The SB4 Snappable PC BreadBoard is great Each of the four smaller boards has two for a small project, or four tiny projects. It can power rails. There are bonus two-hole pads be used as a single prototyping board, or it can along the centerline allowing DIL (dual in-line) be snapped into two or four smaller boards. It is headers to be used (some boards leave that area scored in two places along the middle to make empty). A top-side silkscreen helps to position snapping into smaller pieces easy. The SB4 is a components. solderable breadboard, so the soldered BPS prototyping boards use high-quality components are permanently attached making a FR4 glass epoxy PCBs for long life. An anti- rugged prototype. tarnish coating protects the copper for a long Two of the boards have 4-hole strips, which shelf-life and provides easy soldering. BPS are good for IC circuits. Two of the boards have boards are lead-free and RoHS compatible. 2-holes strips that are good for higher density circuits (and they can be joined if needed for longer ICs strips). BusBoard Prototype Systems - Built for designers www.BusBoard.com sales busboard.com BPS-DAT-(SB4)-0001 Rev 1.00 Datasheet.doc Page 1 2014 BuSBoard Prototype Systems Ltd. SB4 is a trademark of BPS. All rights reserved. Specifications 2 Snaps into 4 smaller boards for smaller 1oz/ft copper with an anti-tarnish coating for projects. Two with 4-hole strips and two easy soldering. Lead free and RoHS with 2-hole strips. compatible. Solderable PC breadboard with power rails. 912 plated holes, 0.042 holes are drilled on Each smaller board has power rails. 0.1 (2.54mm) centers. Double-sided high-quality FR4 glass-epoxy 2.5 x 3.8in (63.5 x 96.5mm), 1/16 thick circuit board. Plated holes. (1.6mm) Top side silkscreen shows which pads are connected. Soldermask provided. Order Part SB4 Front BusBoard Prototype Systems - Built for designers www.BusBoard.com sales busboard.com BPS-DAT-(SB4)-0001 Rev 1.00 Datasheet.doc Page 2 2014 BuSBoard Prototype Systems Ltd. SB4 is a trademark of BPS. All rights reserved.