P Series
4 Tumbler Snap-in Switchlocks
Features/Benefits Typical Applications
Snap-in mounting Computers
Multi-pole and multi-position Communication equipment
Positive detent
Models Available
Specifications Materials
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC;
SWITCH HOUSING & LOCK: One piece construction,
1 AMP @ 250 V AC (UL) See page L-20 for additional ratings.
6/6 Nylon (UL 94V-2), black
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
4 disc tumbler mechanism.
CONTACT RESISTANCE: Below 10 m typ. initial @
KEYS: One nickel plated brass key and one key with insert
2-4 V DC, 100 mA for both silver and gold plated contacts.
molded plastic head.
9
INSULATION RESISTANCE: 10 min.
TUMBLERS: Disc tumblers, brass.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
CONTACTS & TERMINALS: Q contact material: Copper, silver
INDEXING: 45 or 90, 2-3 positions.
plated. See page L-20 for additional contact materials.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L19 and L21. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
P10113 SP, 90 Index, keypull pos. 1
P20113 DP, 90 Index, keypull pos. 1 & 2
Keying
P100AF SP, 45 Index, keypull pos. 1, 2 & 3
2 Two nickel plated brass keys
P200AF DP, 45 Index, keypull pos. 1, 2 & 3
T One nickel plated brass key
L
P1011U SP, 90 Index, keypull pos. 1 & 2
with insert molded plastic
square head and one
nickel plated brass key
Lock Type
C 4 tumbler lock with detent
Lock Finish
M Plastic lock with matte finish
Terminations
03 Solder lug
WC Wire lead
Contact Material
Q Silver
G Gold over silver
Lock Color
2 Black
Key Color
2 Black
NONE Nickel plated brass
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
L18
SwitchlockSwitchlock
P Series
4 Tumbler Snap-in Switchlocks
SWITCH AND LOCK FUNCTION
CONNECTED TERMINALS
NO. MODEL KEY PULL LOCK
POS. 1 POS. 2 POS. 3
POLES NO. POSITIONS CONFIGURATION INDEXING
TERMINAL NUMBERS
POS. 1
P10113
SP 8-1 1-3
Position 1
90
DP 8-1, 4-5 1-3, 5-7
P20113
POS. 2
POS. 1
P100AF 8-1 1-2
2-3
POS. 2 45
Positions 1, 2 & 3
DP 8-1, 4-5 1-2, 5-6
2-3, 6-7
P200AF
POS. 3
POS. 1
Terminal numbers
Positions 1 & 2 90
SP 8-1 1-3 molded on housing.
P1011U
POS. 2
All models with all options when ordered with Q contact material. LEGEND
= Detent Positions (45 or 90 )
= Key pull possible in these positions.
= Stop Positions
Code number on this side,
logo on opposite side.
TERMINAL NUMBERS
MOLDED ON HOUSING
Part number shown: P100AFTCM03Q22
L
KEYING
OPTION CODE NO. CODE NO.
KEYING OPTIONS
CODE ON KEY ON LOCK
YES NO
2
2 NICKEL PLATED BRASS KEYS
1 NICKEL PLATED BRASS KEYS, WITH
PLASTIC INSERT MOLDED SQUARE HEAD &
T YES NO
1 NICKEL PLATED BRASS KEY
NICKEL PLATED BRASS KEY WITH
NICKEL PLATED BRASS KEY
PLASTIC INSERT MOLDED SQUARE HEAD
1.635
1.766
(41,52)
(44,85)
NOTE: All orders keyed alike with
code number on key. For more
than one key code, replacement
.798
.948 keys, or other special features,
(20,26)
(24,07) consult Customer Service Center.
.775
(19,68)
.775
(19,68)
Key part number: 115140126
Key part number: 11599112602 Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
L19
A126