Tippette Tippette FULL SIZED ROCKER SWITCHES The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Product Highlights: Typical Applications: Ratings Up to 26 Amps 250 VAC General Purpose Applications Illuminated or Non-Illuminated Commercial Food Equipment Multiple Termination, Mounting and Recreational Vehicles Rocker Options Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: sales carlingtech.com www.carlingtech.com Application Support: team2 carlingtech.com Phone: 860.793.9281 Fax: 860.793.9231 2 Tippette Actuator Styles & Special Circuits - General Specifications Electrical Physical Contact Rating 15 amps, 125 VAC Lighted Incandescent - rated 10,000 hours 10 amps, 250 VAC Neon - rated 25,000 hours 3/4 HP 125-250 VAC Seals Bracket - Actuator WBL/MBL 15 amps, 12-30 VDC optional external gasket panel seal Life 25,000 cycles circuit dependent Base Phenolic (150C) 50,000 cycles circuit dependent Rocker/Bracket Nylon 66 (105C) consult factory for applicable circuits. Contacts Fine silver, silver cad-oxide Mechanical Terminals Brass or copper/silver plate Endurance 100,000 cycles minimum 1/4 (6.3mm) Quick Connect terminations standard. Solder lug - Brass Tin Plated Wire Lead 16 gauge standard 105C Mounting 600VAC 1.190 30.22 Screw Terminals - Brass .680 17.27 MOUNTING HOLE (Nylon Snap-in Brackets) .830 21.08 Agency Certifications Panel Thickness: .040 min. - .250 max. 55 - 4 places 1.450 36.83 Select circuits and constructions with VDE/IEC approvals are available. Consult factory *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. *Manufacturer reserves the right to change product specification without prior notice. Email: sales carlingtech.com Application Support: team2 carlingtech.com Phone: (860) 7939281 Fax: (860) 7939231 www.carlingtech.com